Network Setup Menu - Integra DTR-7.4 Instruction Manual

Enjoying Net Audio—Continued
Display Dimmer
Standby/On
Standby
Direct / Pure Audio
Pure Audio Upsampling
Phones Zone 2 ( GRN )
Rec ( RED )
Audio DVD Video 1 Video 2
Selector
VCR 1 VCR 2
/ / /
Enter

Network Setup Menu

Before you can use the DTR-7.4 to play music contained
in the music library on the Network Audio Server and
listen to Internet radio, you must correctly configure the
DTR-7.4's network settings so that it can connect to
your LAN and the Internet.
It is strongly recommended to use a broadband connec-
tion (via an xDSL or CATV leased line) and a router. If
you are connected to the Internet via a narrowband dial-
up connection, you may not be able to enjoy Internet
radio as you expect or at all.
Before setting up the DTR-7.4, make sure that you are
already using a router that provides Internet access and
that the DTR-7.4 is correctly connected with your router
or hub via a LAN cable.
For more information on Internet connectivity, consult
with your ISP (Internet Service Provider) or refer to the
router documentation.
DHCP (Dynamic Host Configuration Protocol) and
AutoIP are mechanisms for network configuration,
which assign IP addresses automatically to network
devices such as the DTR-7.4, PC, and broadband router.
DNS (Domain Name System) is a mechanism which
translates domain names into IP addresses or vice versa.
Domain names such as www.onkyo.co.jp are used for
Web browsing, and IP addresses such as 210.199.170.69
are used for actual network data transfer.
Advanced Menu
0.Hardware Setup
1.Speaker Setup
2.Input Setup
3.Audio Adjust
4.Preference
5.Network Setup
→Basic Menu
[ENTER]Quit:[SETUP]
76
Rec Out Zone 2 Of f
Master Volume
Setup
Tuning
Enter
Return
Preset
Stereo Surround THX DSP Memory FM Mode
A-FO RM Listening Mode Memory
Clear
Video 5 Input
Video 3 Video 4 Video 5 Tape Tuner Phono CD Net Audio
Digital S Video Video
Return Setup
/ / /
Enter
TV CH
4 5 6 -
GHI JKL MNO
7 8 9
PQRS TUV WXYZ TV VOL
+10 0 Clear
--/--- Direct Tuning
Custom
Macro Zone 2
Input
Mode Input
Dimmer Sleep
T V
Input
+
CH
Enter VOL
Disc
Setup
-
Return
Display Muting
5.Network Setup
1.IP Address
2.Proxy Setup
3.MAC Address
4.Client Setup
→Save Settings
[ENTER]Quit:[SETUP]
1 Press the Input button, and then roll the
scroll wheel to select either "IRD" or
"MSRV."
2
Press the scroll wheel, and then press the
Setup button.
L Audio R
DTR-7.4
When the "Basic Menu" is displayed, select
"→Advanced Menu" using the
buttons and press the Enter button to display the
"Advanced Menu."
3
Use the
"5. Network Setup" and then press the
Enter button.
The "Network Setup" menu appears.
4
Use the
an item and then press the Enter button.
5
Use the
an item and then use the
buttons to set the desired value.
6 When you've completed the settings on
any menu, press the Return button to
return to the "5. Network Setup" menu,
use the
"Save Settings," and then press Enter.
Don't turn off the DTR-7.4 while the settings are
being saved (about 2 seconds), otherwise they'll
be lost.
7
Press the Setup button to exit the Setup
menu.
and
and cursor buttons to select
and cursor buttons to select
and cursor buttons to select
and
and cursor buttons to select
cursor
cursor