Adjusting The Headphone Volume Level (Headphones Level); Setting The Background Color For Osd (Osd Setup); Switching The Osd Position (Osd Position) - Integra DTR-7.4 Instruction Manual

Integra a/v receiver instruction manual
Hide thumbs Also See for DTR-7.4:
Table of Contents

Advertisement

Preference (Advanced)—Continued
Adjusting the Headphone Volume
Level (Headphones Level)
If you notice a large difference in the volume when
listening with the headphones than when listening to the
speakers, you can change the headphone volume level so
that you do not have to make adjustments with the main
volume dial each time you put on the headphones.
The headphone volume can be adjusted between –12 and
+12 decibels.
4-2.HeadphoneLevel
a.Headphones Level
Setting the Background Color for
OSD (OSD Setup)
This sub-menu allows you to customize the OSD Setup
Menu to display in the manner you desire.
4-3.OSD Setup
a.Background Color
b.Component Video
c.Immediate Display
d.Display Position
a. Background Color
Select either Blue1, Blue2, Green1, Green2, Magenta,
Red1, or Red2 as the background color when the OSD
Setup Menu is displayed.
b. Component Video
You can select whether the OSD signal is output to the
TV monitor connected to the COMPONENT VIDEO
connectors or not.
OSD On: The OSD signal is output.
OSD Off: The OSD signal is not output.
c. Immediate Display
On: Select to have the screen immediately display
certain operations as you perform them (e.g., having
the input source displayed whenever an input source
selector button is pressed). The display will remain
for five seconds after the operation is completed.
Off: Select to turn off the immediate display of oper-
ations.
:
0dB
Quit:[SETUP]
:Blue1
:OSD On
:On
:Bottom
Quit:[SETUP]
VIDEO 1
d. Display Position
Use this setting to select the position of the immediate
display that appears when certain operations are
performed. You can position the immediate display at
any of ten different levels ranging from the top all the
way to the bottom.
Switching the OSD Position
(OSD Position)
This sub-menu allows you to adjust the position of the
OSD Setup Menu as it is displayed on your screen.
Depending on the monitor used, there may be cases
where the OSD Setup Menu is not displayed in the
center and parts of the menus are cut off. To adjust the
position of the OSD Setup Menu, simply press the cursor
buttons to inch the menu to the position you desire.
4-4.OSD Position
Exit:[RETURN]
63

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents