Integra DTR-7.4 Instruction Manual page 47

Using the Listening Modes—Continued
THX: Changes the listening mode to the THX listening
mode.
If the THX button is pressed
• While playing back Dolby Digital sources
Switches the THX Surround EX mode (Auto → On
→ Off) if the source is a THX Surround EX-compat-
ible source. For details, see "c. THX Surround EX
(Dolby D)" on page 61.
• While playing back Analog/PCM sources
Switches the decoding mode (Pro Logic II Movie →
DTS Neo6:Cinema) for THX processing. For details,
see "b. Decoder (2ch)" on page 61.
• While playing back DTS sources
Switches the DTS-ES mode from Auto → On → Off.
Changing the DTS-ES mode allows you to enjoy the
DTS THX Cinema, DTS-ES Discrete THX Cinema,
and DTS-ES Matrix THX Cinema surround systems.
For details, see "d. DTS-ES" on page 61.
Be aware that if surround back speakers are not con-
nected, or if the Surr Back/Zone 2 setting of the Surr
Relationship between input source and listening mode
Listening modes marked with the "✔" can be selected. For columns that list a number of listening modes, the display
will correspond to the format of the signal from the source media.
Input source signal (display)
Type of software
Button/Listening Mode
*1
Pure A Pure Audio
*1
Direct Direct
Stereo Stereo
PLII Movie
PLII Music
DTS Neo:6 Cinema
DTS Neo:6 Music
Dolby Digital
*2
Dolby Digital EX
DTS
DTS 96/24
*2
DTS-ES Descrete
*2
DTS-ES Matrix /
DTS-ES + Neo:6
THX Cinema
*2
THX Surround EX
Mono
Theater-Dimensional
Mono Movie
Enhance
Orchestra
Unplugged
Studio-Mix
TV Logic
ALL Ch Stereo
*1 On the DTR-7.4, use the Direct/Pure Audio button for selecting these listening modes.
*2 Available only when the surround back speakers are connected to the DTR-7.4.
*3 Available only when the input source is encoded in the DTS 96/24 format.
*4 Available only when the input source is encoded in the DTS-ES Discrete format.
*5 The DTS-ES Matrix listening mode is enabled when the input source is encoded in the DTS-ES Matrix format. When the input source is in
DTS format but other than 6.1ch, and the surround setting for "DTS-ES" is set to "On," the DTS-ES+Neo:6 listening mode is enabled.
Analog/PCM (2ch) PCM fs= 96k
(2ch)
Tape, Video tape, DVD
Vinyl, Tuner, CD, (96kHz/
MD, DVD (Stereo), 24bit)
LD, Digital Satellite
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Back/Zone 2 Sub-menu is set to "Zone 2," the THX Sur-
round EX, DTS-ES Discrete, or DTS-ES Matrix listen-
ing modes cannot be selected.
DSP / : Changes the digital processing mode that is
currently being input from the selected input source as
shown below.
Mono, Theater-Dimensional, Mono Movie, Enhance,
Orchestra, Unplugged, Studio-Mix, TV Logic, All Ch
Stereo, Mono.
The digital processing modes available depend on the
selected input source.
All CH ST (remote controller only): Changes to All Ch
Stereo the listening mode for the input signal of the input
source currently selected. If pressed, the corresponding
setting in the Listening Mode Preset Sub-menu of the
Setup Menu for the selected input source is also changed
(See pages 56-57).
On the DTR-7.4, use the DSP button for enabling the All
Ch Stereo listening mode.
Dolby Digital DTS
(3ch-5.1ch) (5.1ch, 6.1ch)
DVD, CD, LD,
Digital Satellite DVD
✔ ✔
✔
✔
✔
✔
*3
✔
*4
✔
*5
✔ ✔
✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
Digital Format Digital Format
(DD/DTS) (2ch) (Monaural)
DVD, DVD
Digital Satellite
✔
✔
✔
✔
✔
✔
✔ ✔
✔
✔ ✔
✔
✔
✔
✔
✔
✔
47