Minidisc Mode - Integra DTR-7.4 Instruction Manual

Operating Onkyo Products Using the Remote Controller—Continued
G
Random button
This button is used with the random playback func-
tion.
H
Memory button
This button is used with the memory playback func-
tion, which allows you to create a custom playlist of
tracks.
I
Clear button
This button is used to cancel functions and to clear
entered numbers.

MiniDisc Mode

MiniDisc mode is used to control an Onkyo MiniDisc
recorder connected to the DTR-7.4 via
MiniDisc mode, press the Mode button, and then roll
the scroll wheel until "MD" appears on the display.
Note:
While neither the Input button nor Mode button is illu-
minated, the scroll wheel changes the input source
and remote controller mode simultaneously (e.g., set the
input source and mode to "MD.")
1
On button
This button is used to set the MiniDisc recorder to
On or Standby.
2
Number/letter buttons
These buttons are used to enter track numbers and
to enter times for locating specific points in time.
3
Mode button
This button is used with the scroll wheel to select
the remote controller modes. Press this button first,
and then roll the scroll wheel until "MD" appears
on the display.
4
Display button
This button is used to display information about the
current disc or track, including the elapsed time,
remaining time, total time, and so on.
5
Previous/Next /
The Previous button is used to select the previ-
ous track. During playback it selects the beginning
of the current track. The Next
select the next track.
6
FR/FF / buttons
The FR button is used to start fast reverse. The
FF button is used to start fast forward.
7
Pause button
This button is used to pause MiniDisc playback.
G
8
Rec button
This button is used to start MiniDisc recording.
9
Repeat button
This button is used to set the repeat playback func-
tions.
. To select
buttons
button is used to
0
Eject button
This button is used to set eject the MiniDisc.
A
LIGHT button
This button is used to turn on or off the remote con-
troller's illuminated buttons.
B
Input button
This button is used to select the input source. Press
this button first, and then roll the scroll wheel until
"MD" appears on the display.
C
VOL button
This button is used to set the volume of the
DTR-7.4.
D
Muting button
This button is used to mute the DTR-7.4. This func-
tion can be set only with the remote controller.
E
Play button
This button is used to start MiniDisc playback.
F
Stop button
This button is used to stop MiniDisc playback.
G
Random button
This button is used with the random playback func-
tion.
H
Memory button
This button is used with the memory playback func-
tion, which allows you to create a custom playlist of
tracks.
I
Clear button
This button is used to cancel functions and to clear
entered numbers.
87