Setup Menu - Integra DRX-5 Basic Manual

> Specifications > Specifications > Settings > Settings
The unit allows you to configure advanced settings to provide you with an even better
experience.
Operation:
Use the on-screen displays (OSD) that appear on the TV to make the settings.
Press on the remote controller to display the Setup menu.
Setup
1. Input/Output Assign
2. Speaker
3. Audio Adjust
4. Source
5. Listening Mode Preset
6. Hardware
7. Multi Zone
8. Miscellaneous
Select the item with the cursor /
confirm your selection.
Use the cursors / to change the default values.
• To return to the previous screen, press
• To exit the settings, press .
> Listening Modes > Playback Function > Listening Modes > Playback Function

Setup Menu

1. TV Out / OSD
2. HDMI Input
3. Video Input
4. Digital Audio Input
5. Analog Audio Input
buttons of the remote controller and press Enter to
.
1� Input/Output Assign
Make settings related to output to the TV, change the settings for jack allocations to the
various input selectors, and set the feature for displaying operations on the TV (OSD), etc.
■ 1� TV Out / OSD
Setting Item Default Value
HDMI Out MAIN
1080p -> 4K Off
Upscaling
Super Resolution (2)
Zone 2 HDMI Not Use
HDBaseT(TM) Not Use
OSD Language English
> Basic Manual > Basic Manual
Troubleshooting Appendix Troubleshooting Appendix
Setting Details
Select the HDMI jack to be connected with the TV.
"MAIN": When connecting the TV to the HDMI OUT
MAIN jack
"SUB": When connecting the TV to the HDMI OUT
SUB jack
"MAIN+SUB": When connecting to both the MAIN
and SUB jacks
When using a TV that supports 4K, video signals
input at 1080p can be automatically upscaled to 4K
for output.
"Off": Do not use this function
"Auto": Use this function
• Select "Off" if your TV does not support 4K.
When you have set "1080p -> 4K Upscaling" to
"Auto", you can select the degree of video signal
correction from "Off" and between "1" (weak) and
"3" (strong).
Make the setting when you output to the Zone 2 TV
connected to the HDMI OUT ZONE 2/SUB jack.
"Use": Enable this function
"Not Use": Disable this function
Set when outputting the input HDMI signals from
the HDBaseT port via an Ethernet cable.
"MAIN": When connecting the HDMI OUT MAIN
jack and the HDBaseT IN port
"SUB/ZONE 2": When connecting the HDMI OUT
SUB/ZONE 2 jack and the HDBaseT IN port
Select the on-screen display language from the
following.
English, German, French, Spanish, Italian, Dutch,
Swedish, Russian, Chinese
| |
5