Speaker Setup - Integra DTR-5.5 Instruction Manual

DTR-6.5,5.5_En.book Page 46 Wednesday, July 28, 2004 9:07 AM
First Time Setup —Continued

Speaker Setup

Some of the settings in this section are set automatically
by the Automatic Speaker Setup function (see page 39).
Here you can check the settings made by the Automatic
Speaker Setup function, or set them manually, which is
useful if you change one of the connected speakers after
using the Automatic Speaker Setup function.
Speaker Configuration
This setting is set automatically by the Automatic
Speaker Setup function (see page 39).
Here you can specify which speakers are connected and
their individual sizes.
For speakers with a cone diameter
over 6-1/2 inches (16 cm), specify
large, and for those with a diameter
below this, specify small.
For the DTR-6.5, if you're using
THX-certified speakers, specify
Small for all speakers.
C D Tape
7
Phono
+ 10
--/---
Input Selector
Macro
1
1
Receiver DVD
Tape
T V VCR
Dimmer
2, 3 TV
Input
+
CH
Disc
-
Prev
CH
Display
Rec
Audio Subtitle
Surround All ST
1
Press the [Receiver] button fol-
lowed by the [Setup] button.
Receiver
The main menu appears onscreen.
46
Cone diameter
Tuner
8 9
TV VOL
0 Clear
2 3
Zone 2
Remote Mode
C D MD/CDR
Cable SAT
Sleep
2–11
VOL
Enter
1, 12
Muting
Random
Angle Last Memory
THX Stereo
2
Use the Up and Down [
buttons to select "2. Speaker
Setup," and then press [Enter].
Enter
The Speaker Setup menu appears.
Enter
3
Use the Up and Down [
buttons to select "1. Speaker
Config," and then press [Enter].
Enter
The Speaker Config menu appears.
Menu
------------------------
Basic Setup
2.Speaker Setup
1.Initial Setup
------------------------
2.Speaker Setup
1.Speaker Config
2-1.Speaker Config
Enter
2.Speaker Distance ------------------------
Advanced Setup
3.Level Calibration a.Subwoofer
3.Surround Setup
4.Equalizer Settings
b.Front
4.Audio Adjust
c.Center
5.Listening Mode Preset
d.Surround
6.Preference
e.SurroundBack :Small
f.SurrBack ch
g.Crossover
h.Double Bass
4
Use the Up and Down [
buttons to select "a. Subwoofer,"
and then use the Left and Right
Enter
[ ]/[ ] buttons to select:
Yes: Select if a subwoofer is con-
nected.
No: Select if no subwoofer is con-
nected.
5
Use the Up and Down [
buttons to select "b. Front," and
then use the Left and Right [
Enter
[ ] buttons to select:
Small: Select if the front speakers are
small.
Large: Select if the front speakers are
large.
Note:
• If the Subwoofer setting in step 4 is
set to No, this setting is fixed at
Large.
]/[ ]
]/[ ]
:Yes
:Large
:Small
:Small
:2ch
:100Hz
:Off
]/[ ]
]/[ ]
]/