Integra DTR-5.5 Instruction Manual page 33

DTR-6.5,5.5_En.book Page 33 Wednesday, July 28, 2004 9:07 AM
Connecting the AV receiver —Continued
■ Using Analog Connections
If your video source doesn't have a digital audio output,
or you want to record from it, you'll need to make the
following analog audio connection.
Use an analog audio cable to connect the AV receiver's
VIDEO 3 IN L/R jacks to the analog audio output on
your video source, as shown.
IN 4 IN3 IN2 IN1 OUT
RS 232 OPTICAL
COMPONENT VIDEO
IN 3 IN 2 IN 1 OUT
Y
VIDEO 3 VIDEO 2 VIDEO 1 DVD MONITOR
IN OUT IN OUT IN IN OUT FRONT
V
P B
S
P
R
IN IN OUT IN IN OUT IN OUT IN FRONT SURR CENTER
L
GND
R
SUB
WOOFER
PHONO CD TAPE VIDEO 3 VIDEO 2 VIDEO 1 DVD
Satellite, cable, set-top
box, LD player, etc.
Connecting a Camcorder, Games
Console, etc.
Video Connections
You only need to use one of the following connection
methods.
■ Using Composite Video
Use a composite video cable to connect the AV receiver's
VIDEO 4 INPUT VIDEO jack to the composite video
output on your camcorder, games console, etc., as
shown.
Zone 2
Standby
VIDEO OUT
Camcorder,
games console, etc.
IN
L
DIGITAL
COAXIAL
IN 2 IN 1
OUT
R
PRE OUT
SURR CENTER SURR BACK
L
L
R
VIDEO 3
R
SUB
WOOFER
L ZONE 2
OUT
REMOTE
CONTROL
SUB
R
WOOFER
R L
AUDIO
OUTPUT
Video
■ Using S-Video
Use an S-Video cable to connect the AV receiver's
VIDEO 4 INPUT S VIDEO jack to the S-Video output
on your camcorder, games console, etc., as shown.
Zone 2
Standby
S VIDEO OUT
Camcorder,
games console, etc.
Audio Connections
Use an analog audio cable to connect the AV receiver's
VIDEO 4 INPUT AUDIO L/R jacks to the analog audio
output on your camcorder, games console, etc., as
shown.
Zone 2
Standby
AUDIO
OUTPUT
L
R
L
Camcorder,
games console, etc.
If your camcorder, games console, etc., has an optical
digital audio output, use an optical digital audio cable to
connect it to the AV receiver's VIDEO 4 INPUT DIG-
ITAL jack, as shown.
Zone 2
Standby
DIGITAL OUT
Camcorder,
games console, etc.
S Video
Audio R
Digital
33