Displaying Source Information - Integra DTR-5.5 Instruction Manual

DTR-6.5,5.5_En.book Page 55 Wednesday, July 28, 2004 9:07 AM
Basic Operation —Continued

Displaying Source Information

You can display various information about the current
input source as follows.
+ 10
--/---
Input Selector
Macro
1
Receiver
Receiver DVD
Tape
T V VCR
Dimmer
TV
Input
+
CH
Disc
-
Prev
CH
Display
Display
Rec
Press the [Receiver] button, and
Receiver
then press the [Display] button
repeatedly to cycle through the
available information.
Display
The following information can typically be displayed for
input sources.
Input source &
volume
Signal format*
or sampling
frequency
Input source &
listening mode
*If the input signal is analog, no format information is
displayed. If the input signal is PCM, the sampling fre-
quency is displayed. If the input signal is digital but not
PCM, the signal format is displayed. Information is dis-
played for about three seconds, then the previously dis-
played information reappears.
Interpreting Surround Channel Values
A
A: The number of front channels (3 means front left,
front right, and center).
B: The number of surround channels (2 means surround
left and surround right). If there's surround back
channel information, this will be 3.
C: LFE channel for subwoofer (1 means yes).
0 Clear
2 3
Zone 2
Remote Mode
C D MD/CDR
Cable SAT
Sleep
VOL
Enter
Muting
Random
B C
55