Page 1 Welcome Welcome to the world of Motorola digital wireless communications! We are pleased that you have chosen the Motorola V70 wireless phone. Headset Jack Insert headset accessory for hands-free use. Volume Key Adjust earpiece and ringer volume. Left Soft Key Perform functions identiﬁed by left...
Page 2 (Canada) MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. TrueSync, Sidekick, Starﬁsh and the Stylized Starﬁsh Logo are registered trademarks of Starﬁsh Software, Inc., a wholly owned independent subsidiary of Motorola, Inc.
Page 3: Menu Map
Menu Map Main Menu • Recent Calls • Received Calls • Dialed Calls • Notepad • Call Times • Call Cost • Service Dial • Fixed Dial • Phonebook • Datebook • Quick Dial • Messages • Voicemail • Text Msgs •...
Page 4: Settings Menu
Settings Menu • Ring/Vibrate • Alert • Alert Detail • My Tones • Call Forward • Voice Calls • Fax Calls • Data Calls • Cancel All • Forward Status • Phone Status • My Tel. Numbers • Credit Info/Available •...
Page 5: Table Of Contents
Contents Menu Map ........3 About This Guide .
Page 6 Dialing an Emergency Number ..... 45 Entering Numbers in the Notepad ....45 Terminating an Incoming Call .
Page 7 Phonebook ........94 Fields in a Phonebook Entry Form ....94 Storing a Phonebook Entry .
Page 8 Messages—Text ....... 120 Setting Up the Text Message Inbox ....120 Receiving a Text Message .
Page 9 Data and Fax Calls ......155 Connecting Your Phone to an External Device ..156 Sending a Data or Fax Call .
Page 10: About This Guide
Using Your Phone’s Features This user guide introduces you to the many features in your Motorola V70 phone. A reference guide for your phone is also available that explains the phone’s features in more detail. To obtain a copy of the reference guide or another copy of this user guide, see the Motorola Web site at: http://motorola.com/consumer/manuals (United States)
Page 11: Optional Features
SIM card, and/or subscription-dependent features. These features may not be offered by all service providers in all geographical areas. Contact your service provider for information about availability. Optional Accessories Features marked with this label require the use of an optional Motorola Original™ accessory.
Page 12: Safety And General Information
The output power level typically may vary over a range from 0.0 watts to 1.12 watts. Exposure To Radio Frequency Energy Your Motorola phone is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy (EME): •...
Page 13: Antenna Care
Safety and General Information • National Council on Radiation Protection and Measurements (NCRP) of the United States, Report 86, 1986 • International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998 • Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999 •...
Page 14: Phone Operation
When using any data feature of the phone, with or without an accessory cable, position the phone and its antenna at least one inch (2.5 centimeters) from your body. Approved Accessories For a list of approved Motorola accessories, visit our website at www.motorola.com .
Page 15: Medical Devices
Safety and General Information Electromagnetic Interference/ Compatibility Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise conﬁgured for electromagnetic compatibility. Facilities To avoid electromagnetic interference and/or compatibility conﬂicts, turn off your phone in any facility where posted notices instruct you to do so.
Page 16: Other Medical Devices
Safety and General Information Persons with pacemakers should: • ALWAYS keep the phone more than six inches (15 centimeters) from your pacemaker when the phone is turned ON. • NOT carry the phone in the breast pocket. • use the ear opposite the pacemaker to minimize the potential for interference.
Page 17: Operational Warnings
Safety and General Information • give full attention to driving and to the road. • use hands-free operation, if available. • pull off the road and park before making or answering a call if driving conditions so require. Operational Warnings For Vehicles With an Air Bag Do not place a portable phone in the area over an air bag or in the air bag deployment area.
Page 18: Blasting Caps And Areas
Safety and General Information Blasting Caps and Areas To avoid possible interference with blasting operations, turn OFF your phone when you are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio.” Obey all signs and instructions. Operational Cautions Antennas Do not use any portable phone that has a damaged...
Page 19: Getting Started
Before you can use your phone, you need to install and charge the battery. Your phone is designed to be used only with Motorola Original batteries and accessories. We recommend that you store batteries in their protective cases when not in use.
Page 20 Getting Started Step 1 Remove the phone’s back cover: a While pressing the release button at the bottom of the cover, slide the cover downward. b Pull the cover away from the base.
Page 21 Getting Started Step 2 Insert the SIM card, with the notch at the upper right and the gold plate downward, into the SIM slot (located above the battery compartment). When the SIM card is properly positioned, the battery compartment terminals are visible. 3 Install the battery by inserting the tabs at the base of the battery...
Page 22: Charging The Battery
Getting Started Step 6 Push down on the cover while sliding it upward into position. Charging the Battery New batteries are shipped partially charged. Before you can use your phone, you need to install and charge the battery, as indicated by the following instructions. Some batteries perform best after several full charge/discharge cycles.
Page 23: Turning Your Phone On
Getting Started Note: When you charge the battery, the battery level indicator in the upper right corner of the display shows how much of the charging process is complete. See the “Battery Level Indicator” item on page 36. Turning Your Phone On Step 1 Open the phone...
Page 24 Getting Started Step 3 If necessary, enter your SIM card PIN code and press 4 If necessary, enter your four-digit unlock code and press Result unlock your SIM card Caution: If you enter an incorrect PIN code three times in a row, your SIM card is disabled and your phone displays SIM Blocked...
Page 25: Making A Call
Getting Started Making a Call To call a number, your phone: • must be rotated completely open to expose the keypad • must be turned on • must have a SIM card inserted and unlocked • must have a network connection with adequate signal strength Press 1 keypad keys...
Page 26: Receiving A Call
Getting Started Receiving a Call To receive a call, your phone: • must be turned on • must have a SIM card inserted and unlocked • must have a network connection with adequate signal strength If your phone is locked, you must unlock it to answer the call. Note: Your phone cannot receive calls when your SIM card is locked.
Page 27 Getting Started Answering a Call with Rotator Closed When you receive a call, your phone: • rings and/or vibrates • displays Open Rotator Press 1 Open your phone ANSWER ) or Incoming Call IGNORE ANSWER expose the keypad Note: You do not need to complete the next step if the Answer...
Page 28: Displaying Your Phone Number
Getting Started Displaying Your Phone Number From the idle display: Press Note: Your phone number must be programmed on your SIM card in order to use this feature. Quick Access to Your Phonebook You can store a list of names and phone numbers in your phone’s electronic phonebook.
Page 29: Using Your Phone With The Rotator Closed-Optional Headset Not Attached
Getting Started To add a new entry to your phonebook: Press (up arrow) (down arrow) 3 keypad keys Using Your Phone with the Rotator Closed—Optional Headset NOT Attached This section describes your phone’s functionality when its rotator is closed and NO headset (including FM radio headset) is attached.
Page 30: Locking The Phone
Getting Started Locking the Phone When the phone is idle, closing its rotator puts the phone into a “locked” state. You can access only these functions: • acknowledge (but not answer) an incoming call • receive and acknowledge messages and reminders •...
Page 31 Getting Started When the phone is unlocked (with the rotator closed), you can use the following external keys: • Navigation Button ( feature values. • Left Soft Key ( display prompt. • Right Soft Key ( display prompt. For Full Functionality Open the rotator to access all phone functions and features.
Page 32: Using Your Phone With The Rotator Closed And Optional Headset Attached
Getting Started Using Your Phone with the Rotator Closed and Optional Headset Attached When using your phone with the rotator closed and an optional headset attached: • All phone functions are available. • All exposed keys (navigation button, left and right soft keys, volume key) are active.
Page 33 Getting Started Press 0:00:02 N Bhuman HOLD end the call...
Page 34: About Your Phone
About Your Phone See page 1 for a diagram of your phone that describes basic phone components. Display The top section of the display shows phone status indicators. The following illustration shows some of the common indicators that you may see at the top of the display when using your phone. Messages, phone numbers, and menu options appear in the middle of the display.
Page 35 About Your Phone In Use Indicator Signal Strength Indicator 5 O , = Ä Alert Setting Indicator Clock Menu Indicator Signal Strength Indicator Shows the strength of your phone’s connection with the network. Strong You cannot send or receive calls when the “no signal” indicator is displayed.
Page 36 About Your Phone Message Waiting Indicator Appears when your phone receives a text message. Voice Message Waiting Indicator Appears when you receive a voicemail message. Battery Level Indicator Shows the amount of charge left in your battery. The more segments visible, the greater the charge.
Page 37: Changing The Zoom Setting
About Your Phone Clock Shows the current time. Ä Alert Setting Indicator Shows the current selected alert proﬁle. The default alert setting is a ringer. Loud ring Vibrate Silent Changing the Zoom Setting You can set your phone’s display to show either three lines or two lines of text plus soft key labels.
Page 38: Adjusting Volume
About Your Phone Adjusting Volume You can adjust your phone’s earpiece and ringer volume: When you are in a call the idle display is showing You can increase or decrease volume in two ways: • use only the volume key •...
Page 39: Using Only The Volume Key
About Your Phone Using Only the Volume Key The volume key works in only one direction. To Increase Volume Press and release volume key. Each time you press and release the volume key, volume is raised one level. When you press and release volume key repeatedly, volume cycles to highest level, then remains at that level.
Page 40: Battery Use
Caution: To prevent injuries or burns, do not allow metal objects to contact or short-circuit the battery terminals. To maximize your battery’s performance: • Always use Motorola Original™ batteries and battery chargers. The phone warranty does not cover damage caused from using non-Motorola batteries and/or battery chargers.
Page 41 About Your Phone The rechargeable batteries that power this product must be disposed of properly and may need to be recycled. Refer to your battery’s label for battery type. Contact your local recycling center for proper disposal methods. Never dispose of batteries in a ﬁre because they may explode.
Page 42: Sending And Receiving Calls
Sending and Receiving Calls This chapter describes features related to sending and receiving calls. For information about other call-related features, see “Recent Calls” on page 86 and “Data and Fax Calls” on page 155. For basic instructions on how to send, end, and receive a call, see pages 25–26 of the “Getting Started”...
Page 43: Caller Id
Sending and Receiving Calls When automatic redial is turned on, your phone automatically makes a number of redial attempts until the call goes through. When the call goes through, your phone rings or vibrates one time, displays the message connects the call. When automatic redial is turned off, you can manually activate the feature to redial a phone number.
Page 44: Line Security
Sending and Receiving Calls Line Security If your phone displays your phone has detected another device monitoring the call. This message does not appear when caller ID, call cost, or other information ﬁlls the display. Returning an Unanswered Call Your phone keeps a record of your unanswered calls. When you cannot answer a call, your phone displays: •...
Page 45: Dialing An Emergency Number
Sending and Receiving Calls Dialing an Emergency Number Your service provider programs one or more emergency phone numbers (such as 112 or 911) that you can call under any circumstances. You can dial and call the emergency number even when your phone is locked, when you are prompted to enter a code or password, when the SIM card is not inserted in your phone, or when the SIM card is blocked or disabled.
Page 46: Terminating An Incoming Call
Sending and Receiving Calls Terminating an Incoming Call While the phone is ringing or vibrating: Press IGNORE Depending on your phone settings and the type of subscription you have, the call may be forwarded to another number, or the caller may hear a busy signal. Dialing With Speed Dial Speed dial lets you dial any phonebook entry with a minimal number of keypresses.
Page 47: Dialing With 1-Touch Dial
Sending and Receiving Calls Dialing With 1-Touch Dial You can call phonebook entries 1 through 9 with the push of a single key. Press and hold the one-digit speed dial number for one second. To store entries in locations 1 through 9 in the phonebook, see “Storing a Phonebook Entry”...
Page 48: Additional Dialing Features
Sending and Receiving Calls Additional Dialing Features In addition to pressing numbers on your keypad, you can insert numbers or characters and send calls in a variety of ways. To dial the local international access code: Do This Press for two seconds While dialing (with digits visible in the display): Do This...
Page 49 Sending and Receiving Calls Do This Press and then scroll to and select one of the following: • Insert Pause (to insert a • Insert Wait (to insert a • Insert 'n' (to insert an insert a special character when making a call that requires you to dial and send additional digits (for example, to make a calling card call,...
Page 50 Sending and Receiving Calls You can also call numbers using these features: Do This Press V. Dial the entry’s name within two seconds Press > Service Dial > entry to call Press > Fixed Dial > entry to call Press >...
Page 51: Using Features While On A Call
Using Features While On a Call Using Call Waiting If you subscribe to call waiting, an alert tone sounds while you are on a call to indicate that you have received a second call. To put the ﬁrst call on hold and answer the second call: Press SWITCH LINK...
Page 52: Making A Conference Call
Using Features While On a Call Making a Conference Call To talk to more than one person on a call, you can make a conference call. Call the ﬁrst person, call the second person, then link the two calls. Press 1 keypad keys HOLD (if available)
Page 53: Transferring A Call
Using Features While On a Call Transferring a Call While you are on a call, you can transfer the call to another phone by ﬁrst talking to the person who answers the other phone, or by directly transferring the call. Announce the Call Transfer You can talk to the person who answers the other phone before you transfer the call, to tell them whom you are transferring.
Page 54: Do Not Announce The Call Transfer
Using Features While On a Call Do Not Announce the Call Transfer You can directly transfer a call without talking to the person who answers. Find the Feature Press 1 keypad keys > Transfer enter the phone number where you are transferring the call dial the phone number Your phone displays the message...
Page 55: Additional On-Call Features
Using Features While On a Call Additional On-Call Features While you are on a call, you can perform the following tasks: Do This Press HOLD ) (if available) Press > Hold Press > My Tel. Numbers Press > Send Tones put a call on hold Your phone displays a (ﬂashing phone) indicator to...
Page 56: Using The Menu
Using the Menu Navigating to a Feature You can access many of your phone’s features by using these keys to move through the menu system: Volume Key Adjust earpiece and ringer volume. Left Soft Key Perform functions identiﬁed by left display prompt.
Page 57: Selecting A Feature
Using the Menu This guide shows how to navigate to a menu feature as follows: Find the Feature The > symbol means that you should scroll to and select the feature. This example shows that you should press and select Recent Calls to see the dialed calls list.
Page 58: Entering Feature Information
Using the Menu Entering Feature Information Features such as the phonebook and datebook require you to enter information to ﬁll in an entry’s details: Press scroll down to additional items. Press CANCEL (L) to exit without making changes. DONE (L) appears when you enter or edit information.
Page 59 Using the Menu The message center lets you compose and send text messages. (See “Entering Text” on page 60.) A flashing cursor shows you where the text will appear: Flashing cursor indicates insertion point. Press CANCEL to exit without making changes. When you enter text, the ﬂashing cursor changes to a block cursor , and the soft key functions change:00 Block...
Page 60: Entering Text
Entering Text Various text entry methods make it easy for you to enter names, numbers, and text messages on your phone. You can enter all characters (letters, numbers, and symbols) using the standard tap method. Other text modes let you easily enter numbers and symbols, or insert text already stored on your phone.
Page 61: Tap Method
Tap Method Tap method is the default standard mode for entering text on your phone. To activate tap method from any text entry screen, press and select the Tap Method To enter text using the tap method: Do This 1 Press a number key one or more times 2 Continue to press...
Page 62: General Text Entry Rules
General Text Entry Rules Use the keypad to enter letters, numbers, symbols, and other characters with the tap method. Press the same key repeatedly to cycle through available characters. (See the “Character Chart” on page 63.) Press a number key to enter text at ﬂashing cursor location.
Page 63: Character Chart
• The ﬁrst character of each sentence is capitalized unless you manually change it. (Press lowercase while it is highlighted by the block cursor.) Character Chart Use this chart as a guide for entering spaces, numbers, letters, symbols, and other characters with the tap method. space .
Page 64: Symbol Mode
Symbol Mode Your phone provides an alternate way to ﬁnd and enter symbol characters in a text message. You can view and select from a variety of available symbols. To activate symbol mode from any text entry screen, press and select the Symbol To enter a symbol in symbol mode: Do This...
Page 65: Predictive Text Entry With Itap™ Software
Symbol Chart Use this chart as a guide for entering symbols in symbol mode. space . ? ! , @ _ & : ; " - ( ) ' ¿ ¡ % £ $ ¥ @ _ \ / : ; "...
Page 66: Enter Words
Enter Words To enter a word with iTAP software: Do This 1 Press a number key one time 2 Press number keys (one per letter) 3 When you have entered all the letters of the word, press 4 Press SELECT Entering Text enter the ﬁrst letter of the word The letters associated with the key...
Page 67 For example, to spell the word “act,” press display shows: Flashing cursor indicates insertion point. Press DELETE to clear the last letter entered. Enter Novel Words You may enter a word that is not in the iTAP software dictionary. If you enter all the letters of a word but the word is not displayed: Do This 1 Press...
Page 68 Do This 3 Press SELECT then press the scroll left 4 Continue entering letters and highlighting letter combinations Punctuation The iTAP software automatically adds a space after each word. When you enter punctuation, this space is removed. To enter punctuation with iTAP software: Press Capitalization The ﬁrst word of a sentence is automatically capitalized, with...
Page 69: Enter Numbers
Enter Numbers To enter a number with iTAP software: Do This 1 Enter the ﬁrst digit and then highlight it 2 Press number keys 3 Press SELECT Delete Letters and Words Place the cursor to the right of the text that you want to delete, and then: Do This Press...
Page 70: Menu Feature Descriptions
Motorola Web site at: http://motorola.com/consumer/manuals (United States) http://www.motorola.ca/manuals (Canada) or contact the Motorola Customer Call Center at 1-800-331-6456 (United States) or 1-800-461-4575 (Canada). Main Menu ECENT ALLS Received Calls View a list of recently received calls.
Page 71: Call Cost
Menu Feature Descriptions Notepad Call or store the last number entered on the keypad. See “Entering Numbers in the Notepad” on page 45, and “Using the Notepad” on page 89. Call Times View call timers that track time spent on your last call, dialed calls, received calls, all calls since reset, and all calls total.
Page 72 Menu Feature Descriptions Fixed dial list entries can be any length. If there is a ﬁxed dial entry for the digits 555, users can call any number that starts with 555. You must enter your SIM PIN2 code to edit ﬁxed dial entries.
Page 73 Menu Feature Descriptions ESSAGES Adjust message settings, view and manage the various types of messages your phone can receive and/or send: Voicemail Text Msgs Browser Alerts Info Services Quick Notes Outbox Drafts HORTCUTS Create keypad shortcuts to menu features. See “Shortcuts” on page 127.
Page 74 Menu Feature Descriptions OICE Dial a phonebook entry by saying the pre-recorded voice name for that phonebook entry. See “Voice Dial Using the Menu” on page 100. SIM A PPLICATIONS Access information and applications stored on your SIM card. Your SIM card may contain applications that process your outgoing calls, text messages, and other events.
Page 75 Menu Feature Descriptions Settings Menu IBRATE Alert Select a ring or vibration alert proﬁle for incoming calls and messages. See “Ring/Vibrate” on page 140. Alert Detail Change details about the current alert proﬁle. Alert represents the name of the alert proﬁle. See “Ring/Vibrate”...
Page 76: Battery Meter
Menu Feature Descriptions HONE TATUS My Tel. Numbers View, enter, and edit information about your name and phone number. Credit Info View the credit available, its expiration date, and the date of the last deposit. (This feature is available only if you subscribe to a prepay option.) Credit Available View the credit available.
Page 77 Menu Feature Descriptions Other Information View your phone’s feature speciﬁcations (if available from the service provider). ROWSER ETUP Adjust the micro-browser’s network connection settings, or create a new network connection proﬁle. ETUP Set the features that are active during a call, such as the in-call timer, call waiting, and call answering options.
Page 78 Menu Feature Descriptions Total Cost Credit Available Call Cost Setup Adjust call cost settings. You can assign a credit limit so that your phone displays your remaining credit during calls. Your phone notiﬁes you when you approach your limit, and ends the call when you reach it.
Page 79 Menu Feature Descriptions Talk and Fax Activate and deactivate the talk/fax service. Use this feature prior to making a call when you want to talk and then send or receive a fax—all to the same phone number and within the same call. You can also use the talk then fax feature to send a fax during a call.
Page 80: Call Barring
Menu Feature Descriptions ECURITY Phone Lock Lock and unlock your phone. See “Locking and Unlocking Your Phone” on page 162. Lock Application Lock and unlock speciﬁc phone applications (such as phonebook or datebook). When an application is locked, users must enter the unlock code to use the application. Fixed Dial Restrict outgoing calls to numbers on the ﬁxed dial list.
Page 81 Menu Feature Descriptions New Passwords Change your unlock code (originally set to 1234) or your security code (originally set to 000000). See “Assigning a New Code or Password” on page 160. THER ETTINGS Personalize Set several personal phone options: Main Menu Keys Clock Greeting...
Page 82: Other Settings
Menu Feature Descriptions Initial Setup Set many basic phone options: Time and Date 1-Touch Dial Auto Redial Backlight Zoom > Settings > Other Settings > Initial Setup Set the phone’s time and date Assign the 1-touch dial feature to numbers 1 through 9 in your phone memory phonebook or SIM card phonebook.
Page 83 Menu Feature Descriptions Scroll Force the cursor to stop or wrap around when it reaches the top or bottom of a list in the display Turn animation off (to conserve the Animation battery) or on. Animation makes your phone’s menus move smoothly as you scroll up and down.
Page 84 Menu Feature Descriptions Master Clear Network View and adjust your phone’s network settings. Your service provider registers your phone to a network. You can view information about the current network, change how your phone searches for a network, specify your preferred networks, and activate alerts that indicate when a call is dropped or network registration changes.
Page 85 Menu Feature Descriptions Note: The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. Headset Set your phone to automatically answer calls after two rings when connected to a headset.
Page 86: Recent Calls
Recent Calls You can use the recent calls menu to view received calls or dialed calls, retrieve the last number stored in the notepad, and view or reset call times and costs. Viewing the Received Calls or Dialed Calls List Your phone keeps lists of the numbers from calls you recently received and dialed, even if the calls did not connect.
Page 87 Recent Calls Press Last Calls Menu Option Description Create a phonebook entry with the Store selected number in the option does not appear if above the already stored as a phonebook entry.) Delete Delete the entry. (This option does not appear if key.) call the entry’s number...
Page 88 Option Delete All Hide ID Show ID Send Message Add Digits Attach Number Send Tones Talk then Fax Recent Calls Description Delete all entries in the current list. Hide (or show) your caller ID for the next call. Create a new text message, with the selected number in the “Sending a Text Message”...
Page 89: Using The Notepad
Using the Notepad Your phone uses a notepad to store the most recent string of digits entered—either for a phone number that you called or for a number that you entered but did not call. To call the number, create a phonebook entry, or perform other operations with the number stored in the notepad: Find the Feature Press...
Page 90: Viewing And Resetting Call Timers
Viewing and Resetting Call Timers Your phone tracks and records call times. Use the recent calls menu to view and reset a call timer. Network connection time is the elapsed time from the moment you connect to your service provider’s network to the moment you end the call by pressing and ringing.
Page 91 Recent Calls To view a call timer: Find the Feature Press SELECT To reset the call timer: Press RESET > Recent Calls > Call Times scroll to the timer you want to view view the recorded time reset the time (if available) conﬁrm the reset...
Page 92: Viewing And Resetting Call Costs
Viewing and Resetting Call Costs Your phone network can provide the following cost information: Cost Tracker Credit Available Expiration Date Last Deposit Last Call Dialed Calls Received Calls Recent Calls Description Amount of your credit remaining. For GSM advice-of-charge, this is only available if you set a credit limit.
Page 93: All Calls
Recent Calls Cost Tracker Description All Calls Amount spent on all dialed and received calls since the last time you reset this cost tracker. You can reset this value separate from Dialed Calls Dialed Calls not equal To view a cost tracker: Find the Feature Press SELECT...
Page 94: Phonebook
Phonebook You can store a list of names and phone numbers in your phone’s electronic phonebook. You can view these entries and call them directly from your phone. To see the list of names stored in your phonebook, press > Phonebook press VIEW...
Page 95: Storing A Phonebook Entry
Storing a Phonebook Entry A phone number is required for a phonebook entry. All other information is optional. You can store a phonebook entry on your phone or on the SIM card. Entries with a speed dial number from 1 to 500 are stored on the phone.
Page 96 Press 5 keypad keys CHANGE SELECT RECORD Go to step 11 if you do not want to record a voice name for the entry CHANGE Phonebook enter the phone number store the phone number select Type Note: This option is not available for entries stored on a SIM card.
Page 97: Complete Phonebook Entry
Press keypad keys SELECT Complete Phonebook Entry When you are ﬁnished entering information for a phonebook entry: Press DONE Phonebook enter a different speed number, if desired Note: Entries with a speed dial number from 1 to 500 are stored on the phone.
Page 98: Recording A Voice Name For A Phonebook Entry
Recording a Voice Name For a Phonebook Entry You can record a voice name when you create a new phonebook entry, or when you edit a previously stored phonebook entry. This lets you use voice dial to call the number without dialing (see “Voice Dial Using a Soft Key”...
Page 99: Dialing A Phonebook Entry
Do This 6 Press and release RECORD ) and say the entry’s name (in two seconds) 7 Press the voice key and repeat the name Dialing a Phonebook Entry You can use the phonebook list, voice dial, speed dial, or 1-touch dial to call a number stored in your phonebook.
Page 100: Voice Dial Using A Soft Key
Voice Dial Using a Soft Key To call a number using voice dial via a soft key: Do This Press and release and speak the entry’s pre-recorded name (within two seconds). To pre-record a phonebook entry name, see “Recording a Voice Name For a Phonebook Entry”...
Page 101: Editing A Phonebook Entry
Editing a Phonebook Entry You can edit a phonebook entry stored on your phone or the SIM card. Notes: • If you change an entry’s speed dial number, the entry is moved to the new speed dial location and the original entry is deleted.
Page 102: Deleting A Phonebook Entry
Deleting a Phonebook Entry To delete a phonebook entry: Find the Feature Press SELECT Copying Phonebook Entries Between the Phone and SIM Card You can copy one or more phonebook entries from your phone to the SIM card or from the SIM card to your phone. Notes: •...
Page 103: Copy A Single Entry
Copy a Single Entry To copy a single phonebook entry from your phone to the SIM card or from the SIM card to your phone: Find the Feature Press SELECT 5 keypad keys Phonebook > Phonebook scroll to the entry you want to copy Note: Entries with a speed dial number from 1 to 500 are stored on the phone.
Page 104: Copy Multiple Entries
Copy Multiple Entries To copy multiple phonebook entries from your phone to the SIM card or from the SIM card to your phone: Find the Feature Press SELECT CHANGE 6 keypad keys CHANGE Phonebook > Phonebook open the Phonebook Menu scroll to Copy Entries select...
Page 105 Phonebook Press keypad keys CHANGE keypad keys DONE enter the last (highest) speed dial number in the range of entries that you want to copy store the number and return to the Copy Entries menu scroll to To (start) select To (start) enter the ﬁrst (lowest) new speed dial number for the entries’...
Page 106: Checking Phonebook Capacity
You can synchronize phonebook entries between your phone and computer or hand-held device with Starﬁsh ® TrueSync software, a Motorola accessory product. See the TrueSync user guide for more information. Note: TrueSync software is designed to synchronize with basic features of many popular Personal Information Management (PIM) software and hardware products.
Page 107: Setting Up The Phonebook
Setting Up the Phonebook You can specify the sort order for your phonebook entries and the location of your 1-touch dial entries. Phonebook List Sort Preference You can set up your phone to sort your phonebook list by speed dial number (the standard), name, or voice dial. Tip: The voice dial sort is identical to the name sort, except that the entries with voice name tags appear ﬁrst.
Page 108: Touch Dial Preference
1-Touch Dial Preference Your phone lets you specify whether your 1-touch dial entries are located on the phone or the SIM card: Find the Feature Press CHANGE SELECT Phonebook > Settings > Initial Setup scroll to 1-Touch Dial select 1-Touch Dial scroll to the list you want select the list you want >...
Page 109: Datebook
Datebook The datebook is a calendar that lets you schedule and organize events such as appointments and meetings. You can review your schedule of events for the week or by the day, and have the datebook play a reminder alarm for speciﬁc events. Note: You must set the correct time and date in order to use the datebook.
Page 110: Day View
Day View Select a day in the week view, then press day’s events. You can store, edit, view, copy, and delete any event from the day view. Untimed event Down scroll arrow Return to previous screen Press to open Datebook Menu Event View Select an event in the day view, then press the detailed event view.
Page 111: Storing A New Event
Storing a New Event A title is required for a datebook event. All other information is optional. Find the Feature See “Selecting a Feature” on page 57 for instructions on scrolling to and selecting options. Press CHANGE 2 keypad keys DONE Datebook >...
Page 112: Changing Event Information
Changing Event Information To change information about an existing event: Find the Feature Press VIEW VIEW EDIT CHANGE 8 keypad keys DONE Datebook > Datebook scroll to the scheduled event day display the day view scroll to the event you want to change display the event view edit the event...
Page 113: Copying An Event
Copying an Event To copy information from a current event to a new event: Find the Feature Press VIEW SELECT 8 keypad keys DONE DONE Datebook > Datebook scroll to the scheduled event day display the day view scroll to the event to copy open the Datebook Menu scroll to...
Page 114: Deleting An Event
Deleting an Event Find the Feature Press VIEW SELECT SELECT Datebook > Datebook scroll to the scheduled event day display the day view scroll to the event to delete open the Datebook Menu scroll to Delete select Delete For non-repeating events, go to step 7.
Page 115: Radio
Radio You can use your phone to tune, store presets, and listen to FM radio stations when you use the optional Motorola Original™ FM Stereo Radio Headset with your phone. Turning the Radio On and Off Press Radio Note: The...
Page 116: Storing A Preset
Storing a Preset To store a station to a preset that you can recall later: Do This Press and hold a number key ( Selecting a Preset To select a preset radio station: Press a number key ( Sending and Receiving Calls With the Radio On Your phone interrupts the radio signal and rings or vibrates as usual to notify you of an incoming call, message, or other event.
Page 117 To end the call and resume the FM broadcast: Do This Press Press and hold the button on the FM Stereo Radio Headset microphone Turn the radio off before dialing outgoing calls. You do not have to turn off the FM radio feature to dial emergency numbers or numbers selected from your phonebook or other lists.
Page 118: Messages-Voicemail
Messages—Voicemail You can listen to your voicemail messages by calling your network voicemail phone number. Voicemail messages are stored on the network—not on your phone. Contact your service provider for more details. Storing Your Voicemail Number Store your voicemail number in your phone to make it faster and easier to use voicemail.
Page 119: Listening To Messages
Messages—Voicemail Listen to Message Now Rotator Open Press CALL to call voicemail phone number and listen to message. Listening to Messages To listen to your voicemail messages at any time: Find the Feature Your phone calls the voicemail phone number you stored. If you do not have a voicemail number stored, the phone guides you through storing a number.
Page 120: Messages-Text
Messages—Text Text messages are brief messages that you can send and receive (such as Received messages appear on your phone display or in your text message inbox. You must set up the text message inbox before you can send and receive these messages.
Page 121 Messages—Text Press 6 keypad keys CHANGE CHANGE SELECT DONE enter the expiration period—the number of days your network tries to send unreceived messages store the expiration period change the Reply Type scroll to the default type of replies you want to send—text messages, or other formats store the reply type change the...
Page 122: Receiving A Text Message
Messages—Text Receiving a Text Message Note: You must set up the text message inbox before you can receive text messages. See “Setting Up the Text Message Inbox” on page 120. When you receive a new message, your phone displays Message and gives an alert.
Page 123 Messages—Text Messages in the text message inbox are sorted from newest to oldest. The oldest messages are deleted as new ones are added. If you want to save a message, you should lock it to prevent it from being overwritten as new messages are received. Find the Feature Press READ...
Page 124: Sending A Text Message
Messages—Text Option Reply Forward Lock/Unlock Store Number Delete Delete All Create Message Setup Sending a Text Message You can create and send a text message to one or more recipients. The text message feature lets you manually enter each recipient’s phone number, or select one or more numbers from the phonebook or recent calls lists.
Page 125 Messages—Text Press CHANGE 2 keypad keys BROWSE CHANGE 5 keypad keys DONE select enter one or more phone numbers where you want to send the message Tip: Remember to press and hold to add a space between numbers that you enter manually. select one or more phone numbers from the phonebook or recent calls lists...
Page 126: Viewing The Status Of Sent Text Messages
Messages—Text Press Viewing the Status of Sent Text Messages Text messages that you send are stored in the outbox. To view the contents of your outbox: Find the Feature Messages are sorted from newest to oldest. The following icons indicate message status: = sending in progress á...
Page 127: Shortcuts
Shortcuts Your phone includes several pre-programmed shortcuts. You can create additional shortcuts, if you like, to mark frequently used menu items. Standard Shortcuts The following shortcuts are pre-programmed in your phone. You cannot edit or delete these shortcuts. Do This Press , then press and hold...
Page 128: Creating A Shortcut
Creating a Shortcut To assign a keypad shortcut: Do This 1 Press 2 Scroll to the item to which you want to assign a shortcut 3 Press and hold 4 Press 5 Press CHANGE Press DONE Shortcuts enter the menu system highlight the menu item open the shortcut editor The phone displays:...
Page 129: Using Shortcuts
Using Shortcuts You can use a shortcut from the idle display, while on a call, or while scrolling through a menu. Use a Keypad Shortcut If you know the shortcut number: Press 2 the shortcut’s number Select a Shortcut From the List To select a shortcut from the shortcut list: Find the Feature Shortcuts...
Page 130: Micro-Browser
Micro-Browser The micro-browser lets you access Web pages and Web-based applications (such as on-line banking, shopping, and games) on your phone. Contact your service provider to set up access, if necessary. Note: Your phone may be conﬁgured to use a high-speed GPRS (General Packet Radio Service) network connection.
Page 131: Interacting With Web Pages
Micro-Browser If you are unable to establish a network connection with the micro-browser, contact your service provider. Interacting With Web Pages You can perform the following operations on a Web page: Do This Press Press and then SELECT Press keypad keys and then Press to scroll to a...
Page 132: Calculator
Calculator You can use your phone as a convenient calculator and currency converter. Calculating Numbers Find the Feature Press 1 number keys ( left) or ( right) SELECT Selected function appears here Press ( left) or ( right) to highlight a function and to view unseen functions by...
Page 133: Function Description
The calculator can perform the following functions: Function Description Insert a decimal point Clear the calculation Clear entry (replaces the enter subsequent values in a calculation) Subtract Multiply Ö Divide Divide the displayed value by 100 Calculate the exchange rate Change the entry’s sign (positive/negative) Recall the value stored in memory Store the displayed number in memory...
Page 134: Converting Currency
Converting Currency The currency converter works just like the calculator, but uses (currency) function: Find the Feature Press 1 number keys 3 number keys 4 * ( left) or # ( right) SELECT Calculator > Calculator > Exchange Rate enter the exchange rate store the exchange rate enter the amount to convert (amount to multiply by the exchange rate)
Page 135: Games
Games Your phone contains three games that you can play between phone calls. If you get an incoming call, message, alarm, or alert, the game ends automatically. Selecting and Starting a New Game Find the Feature Press SELECT When the game is over, you can play another session of the same game or return to the games menu.
Page 136: Ending A Game
Ending a Game You can end a game at any time. Press BACK Playing a Game Blackjack In this classic Las Vegas card game, you play against the dealer to see who can get closer to 21 points without going over. Rules of the game •...
Page 137 • Blackjack automatically wins against any other hand that totals 21 points. • If you score more than 21 points, you go “bust” or lose. • If you get ﬁve cards without going bust, you win. • If you and the dealer have the same score, the dealer wins. •...
Page 138 • When you submit a guess, you are given clues that indicate how many symbols you have identiﬁed correctly and how many are in the correct position. The position of the clues does not correspond to the location of the symbols. = correct symbol in correct position = correct symbol in wrong position = wrong symbol in wrong position...
Page 139 How to Play When the game begins, you see four blank spaces. To play the game: Do This Press ( left) or ( right) Press Press GUESS Select and then > press Paddleball In this test of endurance, your mission is move your paddle to strike a bouncing ball.
Page 140: Adjusting Your Settings
Adjusting Your Settings You can adjust a wide variety of phone settings to suit your needs. Ring/Vibrate Your phone rings or vibrates to notify you of an incoming call, message, or other event. This ring or vibration is called an alert . You can select one of ﬁve different alert proﬁles: Loud ring Vibrate...
Page 141 Adjusting Your Settings Press SELECT Customize an Alert Proﬁle You can customize a proﬁle by changing the alerts used for speciﬁc events (such as incoming calls, text messages, etc.). Your phone includes a variety of preset alert tones and vibrations. Any changes you make are saved to the current alert proﬁle.
Page 142: Use The My Tones Feature
Adjusting Your Settings Use the My Tones Feature The my tones feature lets you create up to 32 custom alert tones for your phone. The tones you create appear in the list of available alerts (see “Customize an Alert Proﬁle” on page 141). Creating a Tone Find the Feature Press...
Page 143 Adjusting Your Settings Entering Notes To create a new tone, use the keypad keys to enter each note. Press a key multiple times to cycle through its available notes or options (pitch, octave, or length). The default setting for a new tone is a quarter note in octave two.
Page 144 Adjusting Your Settings Enter a note as follows: Task Change the octave Select the note (required) Change a note to a sharp or ﬂat Change a note’s length Add a rest Listen to a new tone as you compose it Action Set the new octave ( selecting the note.
Page 145 Adjusting Your Settings Example Press these keys to play this sequence of notes and rests in octave three: C (quarter note), E ﬂat (quarter note), half rest, and G (whole note): Press 1 1 1 2 2 2 3 3 7 7 4 4 0 0 4 0 0 0 Playing a Tone...
Page 146 Adjusting Your Settings Press PLAY CANCEL Editing a Tone You cannot edit the standard alert tones included with your phone. To edit a custom tone that you created: Find the Feature Press EDIT CHANGE 5 keypad keys Deleting a Tone You cannot delete the standard alert tones included with your phone.
Page 147: Reminders
Adjusting Your Settings Press SELECT Reminders Reminders are alerts that ring or vibrate to notify you about a voicemail or text message you have received, or a datebook event you have scheduled. To set or turn off reminders: Find the Feature Press SELECT scroll to the tone you want to delete...
Page 148: Call Forwarding
Adjusting Your Settings Call Forwarding Call forwarding sends your phone’s incoming voice, fax, and/or data calls directly to another phone number. Use call forwarding options to specify which calls your phone should forward. When you are ready to accept calls on your phone again, you can turn off call forwarding.
Page 149: Check Call Forwarding Status
Adjusting Your Settings Press CHANGE SELECT CHANGE 9 keypad keys BROWSE Note: You can repeat this procedure to enter forwarding information for other call types. Check Call Forwarding Status Your network may store call forwarding status for you. If you change your phone’s call forward settings (see “Set Up or Cancel Call Forwarding”...
Page 150: Reordering Menu Items
Adjusting Your Settings Press View Reordering Menu Items You can customize the order of the items in your phone’s main menu, depending upon your usage. Find the Feature Press GRAB INSERT Customizing a Soft Key Function You can relabel the soft keys (left different main menu items from the idle display.
Page 151: Hands-Free Use
You can user your phone without using your hands by using the phone headset. Be sure that your phone is rotated open. You can also purchase an optional Motorola Original™ Easy-Install Hands-Free Kit for your car. This accessory provides an alternative way for you to use your phone without using your handset.
Page 152 Adjusting Your Settings Press SELECT SELECT SELECT Automatic Hands-Free You can set up your phone to automatically route calls to the Easy-Install Hands-Free Kit when it detects a connection. Find the Feature Press SELECT Power-Off Delay When your phone is connected to the Easy-Install Hands-Free Kit, you can set it to stay on for a speciﬁed time period after you switch off the ignition.
Page 153: Charger Time
Adjusting Your Settings Find the Feature Press SELECT Caution: If you select off when you turn off the ignition. Be careful not to accidentally drain your vehicle battery if you select this option. Charger Time When your phone is connected to the Easy-Install Hands-Free Kit, you can set it to charge itself for a speciﬁed time period after you switch off the ignition.
Page 154: Setting Clock Display
Adjusting Your Settings Setting Clock Display You can specify whether your phone shows a clock when the display times out, and what type of clock is shown. Find the Feature Press CHANGE * This feature is not available on all phones. >...
Page 155: Data And Fax Calls
Kbps. Actual speeds will vary depending on line conditions. • use your phone to send and receive data and fax calls on your computer or hand-held device. For more information about Motorola Original data kits, see the Motorola Web site at: http://www.motorola.com/dataaccessories (United States) http://www.motorola.ca/dataaccessories (Canada)
Page 156: Connecting Your Phone To An External Device
Note: Not all devices are compatible with serial cable or USB cable connections. Check your external device for speciﬁcations. Set Up a Cable Connection Attach a serial cable or Motorola Original USB cable to the phone and external device as follows. Note: Check your computer or hand-held device to determine the type of cable you need.
Page 157: Sending A Data Or Fax Call
Data and Fax Calls Attaching a USB Cable Do This 1 Plug the end of the cable with the Motorola logo into your phone’s accessory connector port. Make sure that the logo and the phone are both facing you. 2 Plug the other end—the USB connection—into the USB port on the external device.
Page 158: Receiving A Data Or Fax Call
Data and Fax Calls Do This 2 Open the application on your computer 3 End the transfer on your computer Receiving a Data or Fax Call You can connect your phone to a computer or hand-held device to receive data or a fax. Use this feature to transfer data to your computer from another device.
Page 159: Sending A Talk Then Fax Call
Data and Fax Calls End the Data/Fax Connection When the data or fax transfer is complete: Do This End the call from the connected device Sending a Talk then Fax Call You can place a call where you talk and then send a fax to the same phone number within the same call.
Page 160: Security
Security Assigning a New Code or Password Your phone’s four-digit unlock code is originally set to 1234, and the six-digit security code is originally set to 000000 at the factory. Your service provider may reset these numbers before you receive your phone. If your service provider has not reset these numbers, we recommend that you change them to prevent other users from accessing your personal information or modifying your phone...
Page 161 To change a code or password: Find the Feature Press CHANGE 3 keypad keys 5 keypad keys 7 keypad keys Security > Settings > > New Passwords scroll to the code or password you want to change select the code or password enter your old code If you do not know your code, see “If You Forget a Code or Password”...
Page 162: If You Forget A Code Or Password
If You Forget a Code or Password If you forget your security code (originally set to 000000), SIM PIN, SIM PIN2, or call barring password, contact your service provider. If you forget your unlock code, try entering 1234 or the last four digits of your phone number.
Page 163: Lock Your Phone Manually
Lock Your Phone Manually Find the Feature Press 1 keypad keys Set Your Phone to Lock Automatically You can set your phone to lock every time you turn it off: Find the Feature Press 1 keypad keys Unlock Your Phone At the Enter Unlock Code Press...
Page 164: Barring Calls
Barring Calls Call barring lets you restrict outgoing or incoming calls. You can restrict all calls, calls to international numbers, or calls while roaming. Find the Feature Press CHANGE SELECT 5 keypad keys Security > Settings > > Call Barring scroll to Outgoing select barring for...
Page 165: Protecting The Sim Card
Protecting the SIM Card Your PIN (Personal Identiﬁcation Number) code protects the information stored on your SIM card. When the SIM PIN feature is activated, you must enter your SIM card PIN code each time you turn on the phone or insert a SIM card. Your SIM card PIN code is given to you by your service provider.
Page 166 Note: In the following key sequence, each key press must occur within two seconds of the previous keypress. Caution: If the unblocking attempt is tried unsuccessfully 10 times, the SIM card is permanently disabled and your phone displays the message Press # # 0 5 2 keypad keys...
Page 167: Troubleshooting
Troubleshooting Check these questions ﬁrst if you have problems with your phone: Question Is your battery charged? Do you in the display? Is the phone set to the proper frequency for your geographical region? Do you have a valid SIM card inserted in your phone? Does the handset...
Page 168 Dropping your phone, getting it wet, or using a non-Motorola battery or battery charger can damage the phone. The phone’s limited warranty does not cover liquid damage or damage caused from using non-Motorola accessories.
Page 169 Troubleshooting Problem I pressed the End/Power key, but nothing happened. The display says: Insert SIM Card Check SIM Card even though I have inserted my SIM card in the phone. The display says: . How SIM Blocked do I unblock my SIM card? The display says: Enter Unlock...
Page 170 Troubleshooting Problem My phone asks for an unlock code when I try to open a feature. My phone does not ring. My phone rings even though I selected the Silent Vibrate ) alert proﬁle. I tried to place a call and heard an alternating high/ low tone.
Page 171 Troubleshooting Problem I cannot send/ receive calls. My phone has poor reception and drops calls. I cannot hear others on my phone. Solution Make sure that you have a phone signal (see the “Signal Strength Indicator” item on page 35). Avoid electrical or radio interference, and obstructions such as bridges, parking garages, or tall buildings.
Page 172 Troubleshooting Problem I cannot open my inbox. How do I see the calls I sent or received? My phone will not send voicemail commands, passwords, or other codes. Solution Before you can use text or information services messages, you must set up the appropriate inbox.
Page 173 Troubleshooting Problem My phone’s display is too light. My battery didn’t last as long as I expected. What can I do to extend battery life? I plugged the data cable into my phone but my phone did not beep. How do I know if the data cable is ready to Solution...
Page 174 Troubleshooting Problem My phone beeped when I attached the data cable, but my fax and data applications don’t work. When sending data with the data cable, why does the computer show a connection rate of 19200 Kbps? I can’t end my data call by closing the application on...
Page 175 Troubleshooting Problem I launched the micro-browser but the display says: Service Not Available I launched the micro-browser but the display says: Data Server Unavailable Solution You may be in an area without service, or you may be connected to a network that does not support Internet access.
Page 176: Speciﬁc Absorption Rate Data
Speciﬁc Absorption Rate Data This model phone meets the government’s requirements for exposure to radio waves. Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed limits for exposure to radio frequency (RF) energy. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
Page 177 † CENELEC is a European Union standards body. ‡ Additional related information includes the Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product.
Page 178: Warranty
(such as CD-ROM) that tangibly embodies each copy of any software sold and/or certiﬁed by Motorola for use with Products. Software that is not tangibly embodied in media and that is purchased separately from Products (such as software that is downloaded from the internet) comes “as is”...
Page 179 II. What the Period of Coverage Is Subject to the following exceptions, one year from the date the Products are purchased by the ﬁrst end-user: • 90-Day Warranty Exception. The warranty is for 90 days for: (a) any software tangibly embodied in media or (b) any accessories for two-way radios that are covered by this warranty, as described in Section I, above.
Page 180 You will receive instructions on how to ship the Products to Motorola or our designated resource. If instructed to ship the Products, you must ship them with freight, duties and insurance prepaid. Regardless of where you are instructed to return the Products, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase;...
Page 181 Motorola. Any of these voids the warranty. • Someone other than Motorola (or its authorized service centers) tests, adjusts, installs, maintains, alters, modiﬁes or services the Products in any way. Any of these voids the warranty.
Page 182 (c) nonconforming or non-Motorola housings or parts. Any of these voids the warranty. • Defects or damage that result from: (a) use of the Products in a manner that is not normal or customary; (b) improper operation or misuse; (c) accident or neglect such as dropping the Products onto hard surfaces;...
Page 183 VIII. Patent and Software Provisions At Motorola’s expense, we will defend you, and pay costs and damages that may be ﬁnally awarded against you, to the extent that a lawsuit is based on a claim that the Products directly...
Page 184 Products, as established by Motorola. Motorola will have no liability to you with respect to any claim of patent infringement that is based upon the combination of the Products or parts furnished under this limited warranty with ancillary equipment, as deﬁned in VI., above.
Page 185 Accessories and software—call the telephone number designated above for the product with which they are used. DO NOT SHIP PRODUCTS TO THESE ADDRESSES — INSTEAD PLEASE CALL. To correspond with Motorola about Products, please write us at http://www.motorola.com or at: In the USA: Motorola, Inc.
Page 186: Index
Index accessories optional 11, 115, 151, 155 standard 19 accessory connector port 1 active line indicator deﬁned 36 illustration 35 feature 88 Add Digits alert creating 142–147 deﬁned 140 indicators 37, 140 reminders 147 type, selecting 141 alert proﬁle customizing 141 deﬁned 140 setting 140–141 alert setting indicator...
Page 187 alert type, selecting 141 alert, creating 142–147 answer options 79 answering 26, 27, 32 answering with rotator closed 27 answering with rotator open barring 164 call waiting 51 calling card 49 canceling 46 cost setup 78 costs 92–93 credit limit 78 deleting 86–88 dialed calls list 50, 86–88 dialing 25...
Page 188 car kit automatic answer 151–152 automatic hands-free 152 charger time 153 power-off delay 152–153 clock deﬁned 37 illustration 35 codes. See passwords computer connecting to phone 156–157 synchronizing data 106, conference call 52 contrast, display 83 cost trackers described 92–93 resetting 93 viewing 93 credit available 76, 92...
Page 189 greeting 81 idle display 34 illustration 35 language 83 zoom setting 37 drafts folder 73 DTMF tones 83, 87, 88, 172 earpiece illustration 1 volume, adjusting 38 emergency number 45 end key functions 1, 23, 25, 56 ending a call 25 message Enter Unlock Code 162, 163...
Page 190 GPRS indicator deﬁned 36 displayed 130 illustration 35 GPRS, deﬁned 130 greeting, display 81 hands-free mode automatic answer 151–152 automatic call routing 152 charger time 153 deﬁned 151 power-off delay 152–153 headset automatic answer 151–152 FM Stereo Radio Headset 115–117 headset jack 1 Hide ID feature 88...
Page 191 end 1, 23, 25, 56 4-way navigation 1, 56 left soft key 1, 56, 150–151 menu 1, 28, 56 right soft key 1, 56, 150–151 send 1, 25, 26, 27, 56, 86 voice 98–99 volume control 1, 38, 56 keypad answering calls 79 volume, setting 141 language, setting 83...
Page 192 dialing number from 47 drafts folder 73 inbox setup 120–121 locking 122–124 outbox 73, 126 reading 122–124 receiving 122 reminders, text message 122, 147 reminders, voicemail 118, sending 48, 124–126 status 126 voicemail 118–119 message waiting indicator deﬁned 36 illustration 35 micro-browser browser alerts 73 Browser Menu...
Page 193 passwords changing 160 default 160 if you forget a password pause character 49 phone accessories, optional 11 accessories, standard 19 active line indicator 36 active phone line, changing answer options 79 connecting to external device 156–157 credit available 76, 92 credit information 76 credit limit 78 date, setting 82...
Page 194 number type indicator 94 1-touch dial 47 phone number 94 preﬁx digits, inserting 48 sorting entries 107–108 speed dial number 46, 94, 96–97 speed dial, using 46 storing an entry 95–97 synchronizing entries 106, voice name entry 98–99 voice name indicator 94 Phonebook Menu PIN code activating/deactivating 165...
Page 195 setting 140–141 type, selecting 141 ring and vibrate alert indicator 37, 140 ringer setting 140–141 volume, adjusting 38, 141 roam indicator deﬁned 35 illustration 35 scroll feature 83 security code 162 send key 1, 25, 26, 27, 56, 86 service dial deﬁned 71 short message service.
Page 196 standby time increasing 40 storing a call 86–88 symbol text mode 64–65 symbols, entering 64–65 synchronizing data 106, 155 talk and fax call 79 talk then fax call 159 tap method text entry 61–63 telephone number, viewing your own 28, 55, 76 text block cursor 59 browse mode 60...
Page 197 type, selecting 141 voice dial dialing a number 100 recording voice name 98–99 voice key recording a voice name 98–99 voice message waiting indicator 35, 36 voice name deﬁned 98 phonebook indicator 94 recording 98–99 voicemail number, storing 118 responding to new message 118–119 volume earpiece 38...
Page 198 Index...
Page 199: Wireless Phone Safety Tips
1 Get to know your Motorola wireless phone and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.
Page 200 Jotting down a “to do” list or going through your address book takes attention away from your primary responsibility—driving safely. 6 Dial sensibly and assess the trafﬁc; if possible, place calls when you are not moving or before pulling into trafﬁc. Try to plan calls when your car will be stationary.

Motorola V70 Owner's Manual

Menu Map

About this Guide

Safety and General Information

Getting Started

About Your Phone

Sending and Receiving Calls

Using Features While on a Call

Using the Menu

Entering Text

Menu Feature Descriptions

Recent Calls

Phonebook

Datebook

Radio

Messages-Voicemail

Messages-Text

Shortcuts

Micro-Browser

Calculator

Games

Adjusting Your Settings

Data and Fax Calls

Security

Troubleshooting

SpeciﬁC Absorption Rate Data

Warranty

Index

Wireless Phone Safety Tips

Quick Links

Related Manuals for Motorola V70

Summary of Contents for Motorola V70