Level III Service Manual
6881039B25
2.
Using the disassembly tool, gently lift the keypad PCB assembly out of its
socket on the transceiver board assembly as shown in Figure 14.
KEYBPAD PCB
DISSASSEMBLY TOOL
Figure 14. Removing Keypad PCB Assembly
3.
To replace, align the Keypad PCB assembly with its socket on the transceiver
board.
4.
Gently press the keypad PCB assembly onto the transceiver board assembly
until it snaps into place.
5.
Replace the transceiver board, rear transceiver housing, rear housing cover,
SIM, battery, and battery cover as described in the procedures.
January 08, 2002
Disassembly
TRANSCEIVER BOARD
011104-o
27