Cutting Height Adjustment - Bushranger 500SF Assembly And Owner's Manual

OPERATING THE LAWNMOWER

Cutting height adjustment:

The single lever height adjustment makes for easy change
from one height setting to another. There are ten height
of cut settings available (from 10 mm to 65 mm) and the
most suitable height should be selected that best suits the
grass and weather conditions. To adjust the height of cut
setting, follow the steps below.
• Grip the height adjust lever by the black
knob.
• Apply an outward force to the lever to
disengage it from the quadrant rack setting.
• Holding the lever out, move the lever up
or down the quadrant rack to the desired
height of cut.
• Engage the lever into the quadrant rack by
releasing the outward force.
Note that when using a mulching lawnmower, using
the higher height settings will give the best mulching
performance.
There are two holes in the axle bell cranks on the left hand
side of the mower. The correct setting for the connecting
rod link is to have the rear of the link in the top hole and
the front of the link in the lower hole.
13