Throttle Control Lever; Zone Start Handle; Recoil Start Handle - Bushranger 500SF Assembly And Owner's Manual

OPERATING THE LAWNMOWER

Throttle control lever:

The throttle control lever is located on the right hand
handle for the 500SF / 650SF models.
The throttle lever is moved fully forward into the detented
choke / start position to start a cold engine. The run
position has a detented position for working (or governed)
speed and a graduated quadrant slide allows for selected
slower running speeds. Note that the engine speed
dictates the speed and operation of the cutting system.

Zone Start handle:

Note that as soon as the engine is cranked the cutting blades rotate immediately. Models fitted
with Zone Start allow effortless, trouble free, at the handle starting while keeping feet and hands
away from the cutting mechanism and danger zones. To start simply pull the zone start handle
firmly as you push the mower handlebar away.

Recoil start handle:

Refer to the engine manufacturer's owners' handbook for details.
12