Height Adjuster Position - Bushranger BUSH46TKU6 Operator's Manual

HEIGHT ADJUSTER POSITION

The Bushranger Lawn Mower has 11 height positions. Positions are
indicated by the holes in the Quadrant plate (A) with mesh with the
pin on the height adjuster leaver (B). Position
and must not be used for mowing. In this position the mower
blades are too low to cut grass and damage may result. Please
refer to the table below for more information.
Tip: Remember grass is a living plant and requires its leaves to
live. The leaves are what you cut and by cutting too low can result
in killing of your grass and a poor finish. This can also cause
premature wear and damage to your lawn mower.
HEIGHT ADJUSTMENT TABLE
RESULT DESIRED
1.5cm
2cm
2.5cm
3.5cm
3cm
4cm
1
is a travel position
HEIGHT ADJUSTER
POSITION
1
2
3
4
5
6
bushrangerpe.com.au
B
A
RESULT DESIRED
4.5cm
5cm
5.5cm
6cm
6.5cm
1
HEIGHT ADJUSTER
POSITION
7
8
9
10
11
8