Yamaha Apex RX10RZ Owner's Manual page 83

Specified fuses:
Main fuse:
40.0 A
Fuel injection system fuse:
10.0 A
Headlight fuse:
20.0 A
Signaling system fuse:
10.0 A
Auxiliary DC jack fuse:
3.0 A
Ignition fuse:
20.0 A
Backup fuse:
3.0 A
Radiator fan fuse:
4.0 A
ECS fuse:
10.0 A
Spare fuses:
20.0 A, 10.0 A, 4.0 A, 3.0 A
10. Connect the negative battery lead.
11. Install the air filter case by reversing the
removal steps.
12. Connect the headlight couplers and
multi-function meter unit coupler, and
then install the headlight unit, making
sure to fit the slots on its bottom over the
projections on its stay.
1. Slot
2. Projection
13. Install the headlight unit bolts, and then
tighten them to the specified torque.
Periodic maintenance and adjustment
1
2
Headlight unit bolt tightening torque:
3 Nm (0.3 m·kgf, 2.2 ft·lbf)
14. Install the top cover, the left and right side
covers, and the shroud.
TIP
If the fuse immediately blows again, ask a
Yamaha dealer to inspect the snowmobile.
77