Yamaha Apex RX10RZ Owner's Manual page 53

1. Fastener
2. Right side cover
1. Fastener
2. Left side cover
To install a side cover
1. Place the side cover in the original posi-
tion, and then tighten the fasteners.
2. Install the shroud.
Periodic maintenance and adjustment
TIP
Be sure to fit the projection on the rear of the
side cover into the hole in the lower side cov-
er.
Top cover
To remove the top cover
1. Remove the shroud. (See the above pro-
cedure.)
2. Remove the screws, and then remove
the cable guide.
1. Screw
2. Cable guide
3. Loosen the quick fastener screws, dis-
connect the main switch coupler and aux-
iliary DC jack coupler, and then remove
the top cover.
3
2
1
1. Quick fastener screw
2. Top cover
3. Auxiliary DC jack
4. Main switch
4
1
47