Adjusting The Headlight Beams - Yamaha Apex RX10RZ Owner's Manual

1. Headlight coupler
2. Bulb holder cover
5. Unhook the bulb holder by pushing it in,
then clockwise.
1. Bulb holder
6. Remove the bulb.
7. Install the new bulb, and then hook the
bulb holder onto the headlight unit.
NOTICE: Keep oil and your hands
away from the glass part of the bulb or
its life and illumination will be affect-
ed. If the glass is oil stained, thor-
oughly clean it with a cloth moistened
with alcohol or lacquer thinner.
Periodic maintenance and adjustment
[ECS00621]
1
1. Do not touch the glass part of the bulb.
Bulb type:
Halogen bulb
8. Install the bulb holder cover, and then
connect the headlight coupler.
9. Install the headlight access panel and the
top cover.
ESU12270

Adjusting the headlight beams

1. Remove the top cover. (See page 46 for
removal procedures.)
2. Use a Phillips screwdriver to turn the
headlight beam adjusting screw and ad-
just the headlight beams. To lower the
headlight beams, turn the headlight
beam adjusting screw in direction (a). To
raise the headlight beams, turn the head-
light beam adjusting screw in direction
(b).
1. Headlight beam adjusting screw
3. Install the top cover.
73