Yamaha Apex RX10RZ Owner's Manual page 33

Spring preload setting:
Minimum (soft):
S
Standard:
M
Maximum (hard):
H
Rear shock absorber (RX10R / RX10LT)
To increase the spring preload and thereby
harden the suspension, turn the adjusting ring
in direction (a). To decrease the spring pre-
load and thereby soften the suspension, turn
the adjusting ring in direction (b).
(a)
(b)
1. Spring preload adjusting ring
Spring preload setting:
Minimum (soft):
1
Standard:
4
Maximum (hard):
7
TIP
The spring preload can be further adjusted by
changing the position of the spring seat.
Have a Yamaha dealer make this adjustment
as it requires special tools.
Control functions
ESU10995
Adjusting the rebound damping force
of the rear shock absorber (RX10R /
RX10LT)
EWS00161
WARNING
Do not turn the remote adjusting dial while
the snowmobile is moving as this could
cause loss of control, an accident, and in-
jury.
ECS00291
NOTICE
Be sure to stop the remote adjusting dial
at a marked position around the dial where
there is a click.
The rebound damping force can be adjusted
by turning the rear shock absorber damping
force remote adjusting dial.
To increase the rebound damping force, turn
the adjusting dial in direction (a). To decrease
the rebound damping force, turn the adjusting
dial in direction (b).
(a)
1. Rear shock absorber damping force remote
adjusting dial
(b)
1
27