Lp Conversion Instructions - Lopi Berkshire GS2 Owner's Manual

Optional Equipment
40

LP Conversion Instructions

WARNING
This conversion kit shall be installed by a qualified service agency in accordance with the manufacturer's
instructions and all applicable codes and requirements of the authority having jurisdiction. If the information
in these instructions is not followed exactly, a fire, explosion or production of carbon monoxide may result
causing property damage, personal injury or loss of life. The qualified service agency is responsible for the
proper installation of this kit. The installation is not proper and complete until the operation of the converted
appliance is checked as specified in the manufacturer's instructions supplied with the kit.
CAUTION:
The gas supply shall be shut off prior to disconnecting the electrical power, before proceeding with the
conversion.
IMPORTANT:
A converted appliance must have a label attached marked with the following:
"This appliance was converted to _____ gas with Kit No. _____ by _____ (name and address of organization
making the conversion), which accepts the responsibility that this conversion has been properly made. This
control has been converted for use with gas_____."
Install the conversion kit prior to installing the gas line to ensure proper gas use.
1 Remove the glass (see page 25). Remove the logs and embers (if installed - page 27).
2 Remove the burner (see below). Grasp the burner with both hands and lift it straight up and out of
the firebox.
3 Remove the manifold cover to access the burner orifices (see below).
© Travis Industries
(for qualified installers only)
4121129 100-01314