Optional Wall Switch Or Thermostat Installation - Lopi Berkshire GS2 Owner's Manual

10

Optional Wall Switch or Thermostat Installation

Do not connect 110-120 VAC to the gas control valve or wiring system of this stove. The switch must be
installed by a qualified installer.
Label all wires prior to disconnection when servicing controls. Wiring errors can cause
Caution:
improper and dangerous operation.
When using a GreenSmart™ remote, use the receiver for on/off operation (do not use a wall
Note:
switch or thermostat).
Make sure all wiring is secure and does not contact hot or moving components.
Warning:
The wall switch (or thermostat) may bypass the fireplace on/off switch or be installed in
parallel or series configuration (see below).
Parallel Connection
Thermostat / External
Switch ON
Thermostat / External
Switch OFF
To wire the heater in parallel, follow the directions below:
© Travis Industries
Installation
On / Off Switch On / Off Switch
ON OFF
Heater is ON Heater is ON
Heater is ON Heater is OFF
(for qualified installers only)
Series Connection
Thermostat /
External Switch ON
Thermostat /
External Switch OFF
To wire the heater in series, follow the directions below:
4121129
On / Off Switch On / Off Switch
ON OFF
Heater is ON Heater is OFF
Heater is OFF Heater is OFF
100-01314