Optional Equipment; Lp Conversion Instructions - Lopi allegiance Owner's Manual

Optional Equipment

LP Conversion Instructions

Install the conversion kit prior to installing the gas line to ensure proper gas use.
1 Open the door (page16) and remove the glass (page 14). Remove the logs and coals (page 15)
2 Remove the burner (see illustration below).
Reach into the firebox and
slide the burner to the left
then lift it upwards (lift the
burner from below).
Do not lift the burner from the
pins.
WARNING:
The burner is fragile -
handle it with care.
Replacement Notes:
Make sure the ember shelves are in the
forward corners when the burner is
replaced.
Travis Industries
Place the burner so the mixing
tube slides onto the orifice.
4041220
(Qualified Installers Only)
Make sure this pin
inserts into the hole in
the bottom of the burner.
31
Slide the air shutter all
the way to the right
before installing the
burner.
9 3 5 0 8 1 2 3