Optional Wall Switch Or Thermostat Installation - Lopi Northfield GS Owner's Manual

Installation

Optional Wall Switch or Thermostat Installation

Do not connect 110-120 VAC to the gas control valve or wiring system of this stove. The switch must
be installed by a qualified installer.
This stove may be installed with an optional wall switch or thermostat.
wires will interrupt the burner circuit (see item "a" below).
1. If you wish to bypass the switch, connect the thermostat (on/off switch) wires directly to the green and
white wires (see "b" below).
2. If you wish keep the switch (series) – re-align the wires as shown in item "c" below. NOTE: The
on/off switch must be in the "ON" position for the thermostat (or on/off switch) to operate.
COMFORT
CONTROL
b
Green
White
© Travis Industries
POWER SUPPLY
Red
Black
Red
Red
Black
BATTERY
TRAY
Bypass
Thermostat or
On/Off Switch
4091120
(for qualified installers only)
The thermostat (or on/off switch)
a
Burner Circuit Wires
Green
White
AA
MAIN
BURNER
Series
c
White
Green
Thermostat or
On/Off Switch
100-01239_000
13