Operating Instructions; For Parts Call 606-678-9623 Or 606-561-4983 - Yard Machines MTD PS Operator's Manual

For Parts Call 606-678-9623 or 606-561-4983

For Parts Call 606-678-9623 or 606-561-4983
CUTTING WITH ONLY THE CHAIN SAW.
1. PLEASE READ ALL WARNINGS.
2. Make sure oil reservoir is full.
WARNING:
size and type for your saw.
3. Plug the cord (A) into the appropriate size extension
cord (B) (see Figure 11). Plug the extension cord into a
110/120 volt AC, 15 AMP receptacle (Figure 12).
B
Fig.12
WARNING:
come in contact with the guide bar and saw
chain.
4. Grip the saw with both hands, left hand holding the and
the right hand holding the handle. Thumbs and fingers
should encircle both handles (Figure 13).

OPERATING INSTRUCTIONS

Ensure the extension
cord is of the proper
A
Make sure the exten-
sion cord does not
www.mymowerparts.com www.mymowerparts.com
5. With your RIGHT THUMB, depress the LOCK/OFF but-
ton (C) on the side of the rear handle, and at the same
time squeeze the trigger. To stop the saw, release the
trigger (Figure14).
NOTE: It is not necessary to maintain pressure on the
LOCK/OFF button once the trigger is squeezed and the
motor is running. The LOCK/OFF button is a safety
device to avoid accidental starting.
TO STOP MOTOR
The saw motor will automatically stop when the trigger is
released. The LOCK/OFF button will have to be depressed
and the trigger squeezed to restart the motor.
13
Fig.13
C
Fig.14