What To Do If - AEG COMPETENCE B4100-1 User Instructions

Operating Instructions

What to do if ...

Symptom
The oven does not heat
up.
The oven lighting does
not come on.
If you cannot rectify the fault with the help of the information
given above please contact your local Service force Centre.
Warning: Repairs to the appliance must be carried out by qualified
1
service engineers! Improper repairs can give rise to significant hazards
for the user. If your appliance needs repairing, please contact your local
AEG Service Force Centre.
In-guarantee customers should read the above section, as the engineer
will make a charge if the fault is not a mechanical or electrical break-
down.
Information for appliances with a metal front:
Due to the cold front of your appliance the inner door glass may steam
3
over briefly if you open the door during or shortly after baking or
roasting.
48
Possible cause
The oven has not been
switched on.
The time has not been set.
The necessary settings have
not been made.
The circuit breaker (at the
household fuse box) has
tripped or the fuse has
blown.
The oven light bulb has
blown.
Solution
Switch on the oven.
Set the time.
Check the settings.
Check the fuse.
If the circuit breaker trips or
the fuse blows several times
please call an approved elec-
trician.
Replace the light bulb in the
oven (see Cleaning and Care).