VarTech Systems VTPC190P User Manual page 30

Suspend Mode
After a selected period of system inactivity (1 minute to 1 hour), all devices except the CPU shut off.
The default value is "Disabled".
HDD Power Down
If HDD activity is not detected for a specified length of time in this field, the hard disk drive will be
powered down while other devices remain active.
Soft-Off by PWR-BTTN
This option only works with systems using an ATX power supply. It also allows users to define
which type of soft power OFF sequence the system will follow. The default value is "Instant-Off".
Power On by Ring
This option allows the system to resume or wake up upon detecting any ring signals coming from
an installed modem. The default value is "Enabled".
Resume by Alarm
If enable this item, the system can automatically resume after a fixed time in accordance with the
system's RTC (realtime clock).
** Reload Global Timer Events **
Global Timer (power management) events can prevent the system from entering a power saving mode
or can awaken the system from such a mode.
Primary/Secondary IDE 0/1
Use this item to configure the IDE devices monitored by the system.
COM Port
Use this item to configure the COM ports monitored by the system.
FDD, COM, LPT Port
Use this item to configure the FDD, COM and LPT ports monitored by the system.
PCI PIRQ[A-D]#
This item can be used to detect PCI device activities; if no activity, the system will enter the sleep
mode.
Press <Esc> to return to the Main Menu page.
19.0 Panel Mount PC
Disabled The System will never enter the SUSPEND mode.
It defines continuous idle time before the system
1/2/4/6/8/10/2
entering the SUSPEND mode.
0/30/40
If any item defined in (J) is enabled and active, the
Min/1 Hr
SUSPEND timer will be reloaded.
This option follows the conventional manner of system
performance when turning the power to OFF. Instant-Off
Instant-Off
is a software power OFF sequence requiring the power
supply button is switched to OFF.
Upon the system's turning OFF through the power
switch, this option will delay the complete system power
OFF sequence approximately 4 seconds. Within this
Delay 4 Sec.
delay period, the system will temporarily enter into the
Suspend Mode enabling you to restart the system at
once.
30 486-0010-01-02