Related Manuals for VarTech Systems VTPC100PSS
Summary of Contents for VarTech Systems VTPC100PSS
- Page 1 Solutions for Demanding Applications VARTECH S Y S T E M S I N C. 10.4” C1-D2 Compliant Panel Mount PC Model VTPC100PSS User’s Guide Read these instructions completely before attempting to operate your new Panel Mount PC...
- Page 2 Revision History Date Rev No Summary Page 10/12/09 First Issue 10.4” C1-D2 Compliant Panel Mount PC 486-0029-00-00...
- Page 3 Safety Instructions PLEASE NOTE - This equipment is suitable for use in Class I, Division 2 or non-hazardous locations only. WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT UNLESS POWER HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE NON-HAZARDOUS. AVERTISSEMENT - RISQE D'EXPLOSION - AVANT DE DECONNECTER L'EQUIPMENT, COUPER LE COURANT OU S'ASSURER QUE L'EMPLACEMENT EST DESIGNE NON DANGEREUX.
- Page 4 Explosion Hazard - Substitution of components may impair suitability for hazardous locations. Any Equipment or associated cabling connected to this device must be non-incendive and/or suitable for the Class 1, Division 2 area in which it is to be installed. Hazardous Locations: This equipment is suitable only for the locations specified on the product nameplate, specifically: ...
- Page 5 Environment and Enclosure Information: Review this information on enclosures before installing the product: ATTENTION: Environment and Enclosure This equipment is intended for use in a Pollution Class 2 industrial environment, in overvoltage Category II applications (as defined in IEC publication 60664-1), at altitudes up to 2000 meters (6561 feet).
- Page 6 Cleaning the LCD monitor To clean the LCD panel: Wipe the screen gently with a clean lens brush made of camel hair, or a soft, clean, lint free cloth. This is to remove dust and other particles without scratching the LCD panel. ...
- Page 7 Computer System: Processor Intel® Atom™ N270, 1.6 GHz processor System Memory 200 pin DDR PC-3200 SO-DIMM 2 GB x 1 AMI BIOS BIOS 320 GB SATA Hard Drive Operating System Microsoft XP Professional (SP3) for Embedded Systems Expansion Slots None Back Panel I/O Ports PS/2 Keyboard Connector x 1 PS/2 Mouse Connector x 1...
- Page 8 Storage: 5 to 65°C, 28% RH NC Installation of Your Panel PC Packaged with each carton will be: 1 - VTPC100PSS 1 - #10-32 Mounting Hardware 1 - Users Guide (Printed or on CD) 10.4” C1-D2 Compliant Panel Mount PC...
- Page 9 ATTENTION: Mounting nuts must be tightened to a torque of 24 inch-pounds to provide a proper panel seal and avoid potential damage. Vartech Systems assumes no responsibility for water or chemical damage to the monitor or other equipment within the enclosure due to improper installation.
- Page 10 Panel Mount Drawing: Detail –A– Connections to the Panel Mount PC Bottom Rear View (AC Unit shown) - Connector Panel - 10.4” C1-D2 Compliant Panel Mount PC 486-0029-00-00...
- Page 11 PLEASE NOTE – ANY EQUIPMENT OR ASSOCIATED CABLING CONNECTED TO THIS DEVICE MUST BE NON-INCENDIVE AND/OR SUITABLE FOR THE CLASS I DIVISION 2 AREA IN WHICH IT IS TO BE INSTALLED. Power Connection (Power In) AC models - The AC model of the Panel Mount PC includes an AC line cord which is 3ft long with stripped wires at the connection end.
- Page 12 Panel Mount PC clear and free of excessive dirt or other contaminants. Do not use water or any liquids on the Panel Mount PC. For Additional Assistance Contact Your VarTech Sales Representative Vartech Systems, Inc. 11529 Sun Belt Ct.