VarTech Systems VTPC190P User Manual page 17

Virus Warning
This function allows you to choose the VIRUS Warning feature for IDF Hard Disk boot sector
protection. If this function is enabled and attempt to write data into this area, BIOS will show a
warning message on screen and alarm beep.
CPU L1 & L2 Cache
These two options speed up memory access. However, it depends on the CPU/chipset design. The
default setting is "Enabled". CPUs without built-in internal cache will not provide the "CPU Internal
Cache" item on the menu
Quick Power On Self Test
This option speeds up Power on Self Test (POST) after you turn on the system power. If set as
Enabled, BIOS will shorten or skip some check items during POST. The default setting is
"Enabled".
First/Second/Third Boot Device
These items let you select the 1st, 2nd, and 3rd devices that the system will search for during its
boot-up sequence. The wide range of selection includes Floppy, LS120, ZIP100, HDD0~3, SCSI,
and CDROM.
Boot Other Device
This item allows users to enable or disable the boot device not listed in the First/Second/Third boot
devices option above. The default setting is "Enabled".
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive type, 40 or 80 tracks. The 360Kb type is 40
tracks while 720Kb, 1.2MB and 1.44MB are all 80 tracks. The default value is "Enabled".
19.0 Panel Mount PC
.
Enabled
Disabled
Enabled
Disabled
BIOS searches for floppy disk drive to determine if it is
40 or 80 tracks. Please be noted BIOS cannot
Enabled
differentiate 720K, 1.2M or 1.44M drive type as they all
are 80 tracks.
BIOS will not search for the type of floppy disk drive by
Disabled track number. There will be no warning message
displayed if the installed drive is 360K.
Enable cache
Disable cache
Enable Quick POST
Normal POST
17 486-0010-01-02