Advertisement
3.
A
PEDAL
FRONT HOLE
B
C
*
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
ATTACH THE PEDAL POSTS
Attach the pedal to the right pedal post and
secure, using two machine screws and three
thick washers as shown.
RIGHT
PEDAL POST
NOTE: Make sure you add two thick washers
Fix the right pedal post to the right side
crank arm and secure, using one allen
head bolt as shown.
NOTE: The pedal posts are marked R
RIGHT
PEDAL
POST
Tighten the allen head bolt to the crank
then fasten the nut to the allen head bolt
protruding through the crank arm.
This will secure it in place.
Repeat the same process for the left pedal
post assembly.
NOTE: The right pedal post R should be
with the screw for front hole when
assembling.
,, ,,
and L (Right & Left).
threaded on clockwise.
,, ,,
The left pedal post L should be
threaded on clockwise.
X2
X3
,, ,,
X1
X1
,, ,,
*
Advertisement
