Disengaging The Rotor Blades; Stopping The Engine; Adjusting The Discharge Chute And Chute Deflector - Toro 38588 Operator's Manual

Disengaging the Rotor Blades

To disengage the rotor blades, release the control bar
(Figure 20).
Figure 20

Stopping the Engine

To stop the engine, turn the ignition key
counterclockwise to the Off position (Figure 21).
Figure 21
Adjusting the Discharge Chute
and Chute Deflector
To adjust the discharge chute, press the trigger of the
Quick Shoot™ control on the right hand side of the
handle and move it up or down along the handle. Moving
the control down the handle rotates the discharge chute
to the left; moving the control up the handle rotates the
discharge chute to the right (Figure 22).
To raise or lower the angle of the chute deflector, press
the trigger on the chute deflector and move the chute
deflector up or down (Figure 23).
1. Chute deflector trigger
10
Figure 22
Figure 23
2. Chute deflector