Toro 38588 Operator's Manual page 17

Power clear snowthrower
Table of Contents

Advertisement

1. Arrows
3. Rotate the discharge chute so that it faces straight
ahead and the arrow on the back of the discharge
chute aligns with the arrow on the shroud (Figure 42).
4. Hold the discharge chute in the straight-ahead
position, pull the lower cable casing downward until
you remove the slack in the cable, and tighten the
screw on the lower cable clamp securely (Figure 43).
Figure 41
Figure 42
1. Lower cable casing
5. Pull the upper cable casing forward until you remove
the slack in the cable, and tighten the screw on the
upper cable clamp securely (Figure 44).
1. Upper cable casing
Note: Do not over-tension the cables. If the cables
are over-tensioned, the Quick Shoot will be hard to
operate.
17
Figure 43
Figure 44

Advertisement

Table of Contents
loading

This manual is also suitable for:

38589

Table of Contents