Figure 16
Note: If you pull the recoil handle and feel no
resistance, the starter may be frozen. Thaw out the
starter before attempting to start the machine.
5. While the engine is running, push in the choke lever
slowly.
Engaging the Rotor Blades
To engage the rotor blades, hold the control bar against the
handle
(Figure
17).
Figure 17
1. Control bar
Disengaging the Rotor Blades
To disengage the rotor blades, release the control bar
18).
Shutting Off the Engine
To shut off the engine, turn the ignition key counterclockwise
to the O
position
FF
Adjusting the Discharge Chute
To adjust the discharge chute, move the chute handle and the
chute deflector handle as shown
(Figure
1. Chute handle
9
Figure 18
(Figure
19).
Figure 19
(Figure
20).
Figure 20
2. Chute-deflector handle