Engaging The Rotor Blades; Disengaging The Rotor Blades; Shutting Off The Engine; Adjusting The Discharge Chute And Chute Deflector - Toro Power Clear 821 QZE Operator's Manual

Engaging the Rotor Blades

To engage the rotor blades, hold the control bar
against the handle (Figure
Figure 14
Disengaging the Rotor
Blades
To disengage the rotor blades, release the control bar
(Figure 15).
Figure 15
14).

Shutting Off the Engine

To shut off the engine, remove the key from the
ignition.
Adjusting the Discharge
Chute and Chute Deflector
To adjust the discharge chute, press the trigger of the
Quick Shoot™ control on the right side of the handle
and move it up or down along the handle. Moving the
control down the handle rotates the discharge chute
to the left; moving the control up the handle rotates
the discharge chute to the right
g216251
g006457
To raise or lower the angle of the chute deflector,
press the trigger on the chute deflector and move the
chute deflector up or down
13
(Figure 16).
Figure 16
(Figure 17).
g280416