Dry Operation - Toshiba RAV-SM562XT-E Owner's Manual

COOLING/HEATING/FAN ONLY OPERATION
Start
(1) START/STOP button
Push this button to start the air conditioner.
(2) Mode select button (MODE)
Select Cool , Heat
(3) Temperature button (
Set the desired temperature.
Cooling 21°C or higher.
Heating 28°C or lower.
When the air conditioner is in FAN ONLY operation,
the temperature display is not indicated.
(4) Fan speed button (FAN)
Select one of "AUTO" LOW
+
MED , HIGH
•
The OPERATION lamp (green) on the display panel of the indoor unit
goes on. And operation starts after approximately 3 minutes.
(if you select FAN ONLY mode, the unit will start immediately.)
•
The : Fan only mode does not control temperature.
Therefore, perform only steps (1), (2) and (4) to select this mode.
Stop
START/STOP button
Push this button again to stop the air conditioner.

DRY OPERATION

Start
(1) START/STOP button
Push this button to start the air conditioner.
(2) Mode select button (MODE)
Select DRY .
(3) Temperature button (
Set the desired temperature.
•
The fan speed display indicates AUTO.
•
The OPERATION lamp (green) on the display panel of the
indoor unit lights, and operation starts after approximately
3 minutes.
Stop
START/STOP button
Push this button again to stop the air conditioner.
, or Fan only .
)
+
, LOW , MED
.
)
(3)
(1)
(4)
(2)
,
(3)
(1)
(2)
9
PRESET
START/STOP
FAN MODE AUTO
ECO Hi-POWER
SWING
TIMER
FIX MEMO
ON OFF SET CLR
FILTER
RESET CLOCK CHECK
PRESET
START/STOP
FAN MODE AUTO
SWING ECO Hi-POWER
TIMER
FIX MEMO
ON OFF SET CLR
FILTER
RESET CLOCK CHECK