Configuring Ip Settings - EnGenius ENS202 User Manual

B N S
ASIC ETWORK ETTINGS

4.2.2 Configuring IP Settings

Configure the ENS202 LAN settings for the ENS202 using a static or dynamic IP address.
Configure the network connection type using
IP Network Setting
either a static IP or dynamic IP.
Enter the LAN IP address of the ENS202.
IP Address
Enter the subnet mask of the ENS202.
Subnet Mask
Enter the default gateway of the ENS202.
Default Gateway
Enter the primary DNS address of the ENS202.
Primary DNS
Enter the secondary DNS address of the
Secondary DNS
ENS202.
Click to enable a link-local address for
Use Link-Local Address
the device.
Enter the IPv6 LAN IP address of the ENS202.
IPv6 IP Address
IPv6 Subnet Prefix Length
the ENS202.
Enter the IPv6 default gateway of the
IPv6 Default Gateway
ENS202.
Enter the IPv6 primary DNS of the ENS202.
IPv6 Primary DNS
Enter the IPv6 secondary DNS of the ENS202.
IPv6 Secondary DNS
Click Apply to save the settings or Cancel to discard changes.
Enter the IPv6 subnet prefix length of
4-10
C IP S
ONFIGURING ETTINGS