Configuring System Time - EnGenius ENS202 User Manual

B N S C S T
ASIC ETWORK ETTINGS ONFIGURING YSTEM IME

4.5.7 Configuring System Time

Change the system time of the ENS202 by m anually entering the information, synchronizi n g the device with a PC, or setup automat i c
updates through a network time (NTP) protocol server.
Enter the date and time values in
Manually Set Date and Time
the date and time fields or click the Synchronize with PC
button to get the date and time values from the administrator's
PC.
Select a time zone from the
Automatically Get Date and Time
drop-down list and check whether you want to enter the IP
address of an NTP server or use the default NTP server.
Click to enable or disable daylight
Enable Daylight Saving
savings time. Select the start and stop times from the Start
Time and Stop Time dropdown lists.
Click Save/Apply to apply the changes or Cancel to return
previous settings.
4-48