Configuring Wds Link Settings - EnGenius ENS202 User Manual

B N S
ASIC ETWORK ETTINGS

4.4.4 Configuring WDS Link Settings

Using WDS Link Settings, you can create a wireless backbone link between multiple access points that are part of the same wireless
network. This allows a wireless network to be expanded using multiple Access Points without the need for a wired backbone to link
them, as is traditionally required.
Select the type of WDS
Security
security: None, WEP, or AES.
Enter the WEP key.
WEP Key
Enter the AES
AES Passphrase
passphrase.
Enter the MAC address
MAC Address
of the Access Point to which you want to
extend wireless connectivity.
Select Disable or Enable to
Mode
disable or enable WDS.
Click Accept to confirm the changes or
Cancel to cancel and return previous
settings.
Note:
The Access Point to which you want to extend wireless connectivity must enter the ENS202's MAC address into its configuration. For
more information, refer to the documentation for the Access Point. Not all Access Point supports this feature.
4-38
C WDS L S
ONFIGURING INK ETTINGS