B
N
S
ASIC
ETWORK
ETTINGS
4.3 Router Setup
4.3.1 Configuring WAN Settings
Configure the WAN settings for the ENS202 using a static or dynamic IP address, PPPoE or PPTP.
Static IP
Setting a static IP address allows an administrator
to set a specific IP address for the router and guar-
antees that it can not be assigned a different
address.
Enter the account name provided
Account Name
by your ISP.
Enter the domain name provided
Domain Name
by your ISP.
The maximum transmission unit (MTU)
MTU
specifies the largest packet size permitted for an
internet transmission. The factory default MTU size
for static IP is 1500. The MTU size can be set
between 576 and 1500.
Enter the router's WAN IP address.
IP Address
Enter the router's WAN subnet
Subnet Mask
mask.
Enter the WAN gateway address.
Default Gateway
Enter the primary DNS server address.
Primary DNS
4-12
R
S
OUTER
ETUP