Identifying Controls
Mains power On / Off switch
●
Turn the display unit On or Off.
When turning Off the display
unit, tuner box will also be
turned to Standby mode after
1 min.
Standby switch
●
Turn the tuner
box on or off to
standby mode
Function select
●
Volume / Contrast / Brightness /
Colour / Sharpness /
Tint (NTSC mode) / Bass / Treble /
Balance / Auto Tuning (p. 30 and p. 31)
●
Remote Pairing (p. 41)
14
Display Unit
Power LED
●
Standby: red
On: green
●
When using the remote control, indicates
the TV has received a command.
C.A.T.S. (Contrast Automatic Tracking System) sensor
●
Senses brightness to adjust picture quality when
"Eco Mode" in the Picture Menu is set to "On" (p. 30)
Remote control signal receiver
●
Do not place any objects between the TV remote control signal receiver and remote control.
Tuner Box
Power LED
●
Standby: red
On: green
●
When using the remote control, indicates the TV has received a command.
SD Card slot
(p. 42)
Changes the input mode
Change the channel up/down. When a
function is displayed, press up/down to adjust
the setting of the selected function. When in
standby mode, switches TV on.
Selects channel in sequence
Volume Up / Down
AV4 terminals
(p. 52)
HDMI4 terminal
Headphones jack
(p. 52)
(p. 52)
PC terminal
(p. 52)