Panasonic Viera TH-P54Z10H Operating Instructions Manual page 27

Panasonic equipment connected to the TV can be directly operated with the remote control.
POWER
PROGRAMME
REC
∗
Setting your remote control to operate Panasonic equipments
Switch to BD/DVD
POWER
Press and hold
Enter the appropriate
code
See table below
DVD Recorder / DVD Player / Blu-ray Disc Player
Player theatre / Blu-ray Disc theatre
Note
●
Confirm if the remote control works correctly after changing the code.
●
The codes will be reset to default values if batteries are replaced.
●
Some operations may not be possible on some equipment models.
BD/DVD / TV switch
Switch to BD/DVD to operate Panasonic DVD Recorder, DVD Player,
Player theatre, Blu-ray Disc theatre or VCR
●
Radio frequency function (p. 15) is not available when you select "BD/DVD".
Point the remote control at the connected equipment to operate.
Switch to TV to operate VIERA Link equipment
"VIERA Link Control" (p. 49)
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD: Skip to the previous track or title
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD: Skip to the next track or title
Press and hold to search forward
Pause
Pause / Resume
DVD: Press and hold to play at slow speed
Programme Up / Down
Select programme
Record
Start recording
during the following operations
Press
Type of equipment
VCR
∗
70 (default)
Code
71
72
27