Panasonic Viera TH-P54Z10H Operating Instructions Manual page 8

Accessories
1
Caution
●
Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.
●
Do not mix old and new batteries.
●
Do not mix different battery types (such as alkaline and manganese batteries).
●
Do not use rechargeable (Ni-Cd) batteries.
●
Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat such as sunshine, fire or the like.
Warning
Do not disassemble or modify the pedestal.
●
Otherwise the display unit may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
●
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
●
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic
dealer immediately.
During set-up, make sure that all screws are securely tightened.
●
If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the display unit, and it might fall over and become damaged, and personal injury may
result.
Ensure that the display unit does not fall over.
●
If the display unit is knocked or children climb onto the pedestal with the display unit installed, the display unit
may fall over and personal injury may result.
Two or more people are required to install and remove the display unit.
●
If two or more people are not present, the display unit may be dropped, and personal injury may result.
Pedestal
Base
●
TBLA0460
Pedestal installation kit
Assembly screw (2)
(Silver)
●
XYN8+F30FN
M8 × 30
8
Installing remote's batteries
Pull
open
Hook
Attaching the pedestal
Frame
●
TBLA0464
Assembly screw (4)
(Black)
●
XSB4+10FNK
M4 × 10
2
Note the correct
polarity (+ or -)
Assembly screw (4)
(Black)
●
THEL062N
M5 × 25
Close
Holder cover
●
TBLB3416