Maintenance; Identifying Controls - Panasonic Viera TH-P42S10D Operating Instructions Manual

Maintenance

First, remove the mains plug from the socket outlet.
Regular care: Gently wipe the surface clean of dirt by using a soft cloth.
Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral detergent
(1 part detergent to 100 parts water). Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.
Caution
The surface of the display panel has been specially treated and may be easily damaged.
z
Do not tap or scratch the surface with your fingernail or other hard object.
Take care not to subject the surface to insect repellent, solvent, thinner, or other volatile substances.
z
This may degrade surface quality.
Regular care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent.
Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Caution
Take care not to subject the TV's surfaces to detergent. A liquid inside the TV could lead to product failure.
z
Take care not to subject surfaces to insect repellent, solvent, thinner, or other volatile substances.
z
This may deteriorate the surface by peeling the paint.
Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time.
z
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fire or electrical shock.)

Identifying Controls

SD card slot
HDMI3
terminal
PC terminal
AV4 terminals
Headphone
jack
Mains power On / Off switch
Switch On to turn on the TV
z
8
Display Panel
Cabinet, Pedestal
Mains plug
TV
Remote control signal receiver
Do not place any objects between the TV remote control signal
z
receiver and remote control.
Power LED
Standby: red
z
On: green
When using the remote control, indicates the TV has
z
received a command.
C.A.T.S. (Contrast Automatic Tracking System) sensor
Senses brightness to adjust picture quality when "Eco Mode" in
z
the Picture Menu is set to "On" (p. 22)
Function Select
Volume / Contrast / Brightness / Colour /
z
Sharpness / Tint (NTSC mode) / Bass /
Treble / Balance / Auto Tuning (p. 22 - 23)
Change the channel up/down. When a
function is displayed, press up/down to
adjust the setting of the selected function.
When in standby mode, switches TV on.
Change the input mode