Panasonic Viera TH-P54Z10H Operating Instructions Manual page 55

Updating the software system (Digital TV mode)
Update system software to ensure that you have latest version software.
If there is an update available, a notification banner is displayed when the channel has the update information.
●
To download new software, press "OK"
If you choose not to download, press "EXIT".
To update automatically
Set "Auto Update Search in Standby" to "On" (p. 33)
If there is a new version software being broadcast, the TV will download this automatically.
●
The automatic updating sequence is carried out at 3:00 AM and 5:00 AM every morning under the following condition.
Standby (TV turned Off with the remote control)
Recording is not in progress.
To update manually
Perform "System Update Search Now" (p. 33)
If there is an update available, a notification banner is displayed.
Note
●
During downloading, do not turn Off the TV or touch any buttons.
(The TV is automatically activated after downloading is completed.)
●
When the TV is switched to standby, there will be a clicking sound after a short delay. Similar clicking sounds will also
occur at 3:00 AM and 5:00 AM when "Auto update Search in Standby" (p. 33) is set to "On". These sounds are normal.
Stereo / Bilingual Sound Selection (Analogue TV mode)
When you receive the stereo / bilingual sound system, sound output modes can be selected by pressing the
Stereo / Bilingual Sound Selection button.
Audio Signal
Mode Indicator
NICAM .......Used in New Zealand, Singapore, Hong Kong etc.
Regular broadcast
Type of broadcast
(Standard Audio)
Mode Indicator No Indicator
A2 (German) .......Used in Australia, Malaysia etc.
Regular broadcast
Type of broadcast
(Standard Audio)
Mode Indicator No Indicator
●
If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic switching
occurs, it is recommended you switch from STEREO to MONO.
●
Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
●
When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO position, using
the stereo / bilingual sound selection button.
●
DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some countries.
HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality
sound by connecting the TV and the equipment.
HDMI-compatible equipment (∗1) with an HDMI or DVI output terminal, such as a set top box, a DVD player or a
game equipment can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
About connections, see "External Equipment" (p. 52).
●
HDMI is the world's first complete digital consumer AV interface complying with a non-compression standard.
●
If the external equipment has only a DVI output, connect to the HDMI1 / 4 terminal via a DVI to HDMI adapter
cable (∗2).
●
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal (HDMI1: use
AV2 IN AUDIO terminal / HDMI4: use AV4 IN AUDIO terminals).
●
Audio settings can be made on the "HDMI1 / 4 Input" menu screen. (p. 30)
●
Applicable audio signal sampling frequencies (2ch L.PCM): 48 kHz, 44.1 kHz, 32 kHz
●
HDMI2 and 3 terminals are for digital audio signal only.
●
Use with a PC is not guaranteed. Only HDMI video formats indicated in the HDMI table (p. 57) are applicable.
●
If the connected equipment has an aspect adjustment function, set the aspect ratio to "16:9".
●
These HDMI connectors are "type A".
●
These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright
protection.
●
An equipment having no digital output terminal may be connected to the input terminal of either "COMPONENT",
"S-VIDEO", or "VIDEO" to receive analogue signals.
●
The HDMI input terminal can be used only with the following image signals:
480i, 480p, 576i, 576p, 720p, 1080i and 1080p. Match the output setting of the digital equipment.
●
For details of the applicable HDMI signals, see p. 57.
(∗1): The HDMI logo is displayed on HDMI-compliant equipment.
(∗2): Enquire at your local digital equipment retailer shop.
Downloading (approx. 1 hour.)
STEREO
Regular + NICAM MONO
I
BILINGUAL or DUAL MONO:
MAIN
I
HDMI connection
MAIN
I
I
I
NICAM STEREO
(MAIN )
I
STEREO
/ SUB
I II
II
MONO
SUB
II
II
NICAM DUAL MONO
(MAIN / SUB
I
I
)
II
II
55