Alpine INA-W900 Owner's Manual page 88

Indication for SAT Receiver Mode
• MiniTuner missing/ disconnected or no communication between
the unit and XM Radio.
- Check the XM Tuner.
• The XM or Sirius antenna is not connected to the XM or SIRIUS
radio module.
- Check whether the XM or Sirius antenna cable is attached
securely to the XM or Sirius radio module.
(XM mode)
• XM or Sirius signal is too weak at the current location.
- Wait until the car reaches a location with a stronger signal.
(XM mode)
• Radio is acquiring audio or program information.
- Wait until the radio has received the information.
• The channel currently selected has stopped broadcasting.
- Select another channel.
• The user has selected a channel number that does not exist.
- The unit will revert back to the previously selected channel.
• The user has selected a channel number that is not authorized.
- The unit will revert back to the previously selected channel or
channel 1.
• Radio's firmware is being updated. During firmware update,
audio will be muted until update is completed.
- Wait until the update is completed. After completion,
automatically re-tune to previous channel.
(XM mode)
(XM mode)
(Sirius mode)
(Sirius mode)
(XM mode)
(XM mode)
(Sirius mode)
(XM mode)
(Sirius mode)
• The subscribed program is being updated. During update, audio
will be muted until update is completed.
- Wait until the update is completed. After completion, follow
the indication "SUB Updated Press Any Key" to press any key
on the unit to continue, the unit automatically re-tune to
previous channel.
• The Receiver is updating the Sirius channel line up. During
update audio will be muted until update is completed.
- Wait until the channel update is completed. After completion,
the unit automatically re-tune to previous channel.
Indication for iPhone/iPod Mode
• Abnormal current is run to the USB connector device.
- Attempt to connect another iPhone/iPod.
• An iPhone/iPod that is not supported by the unit is connected.
- Connect an iPhone/iPod that is supported by the unit.
- Reset the iPod.
• An iPhone/iPod is not connected.
- Make sure the iPhone/iPod is correctly connected and the cable
is not excessively bent.
• There are no songs in the iPhone/iPod.
- Download songs to the iPhone/iPod and connect to the
INA-W900.
• Communication error.
- Turn the ignition key off, and then set to ON again.
- Check the display by reconnecting between the iPhone/iPod
and the unit, using the iPhone/iPod cable.
• Caused by the iPhone/iPod Software Version not being
compatible with this unit.
- Update the iPhone/iPod Software Version to be compatible
with this unit.
(Sirius mode)
(Sirius mode)
87
-EN