Follett 7CI100A Installation, Operation And Service Manual page 16

Service
(continued)
10. Unplug the gear motor (three connectors) (Fig. 16).
11. Remove ground screw connection.
12. Remove gear motor:
 Remove M6 allen screw, retainer, spacer and key (Fig. 18.1).
 Remove two M6x90 allen screws (Fig. 18.2).
 Pull gear motor from auger (Fig. 18.3).
 Remove main housing insulation (Fig. 18.4).
13. Remove all traces of petro-gel from auger shaft.
14. Remove compression nozzle:
 Loosen hose clamp (Fig. 19.1).
 Remove transport tube (Fig. 19.2).
16 Dispenser and Ice machine 7CI100A/7FS100A
––––––––––––––––––––––––––––––––––––––––––––––––––––
Fig. 17
Fig. 18
2
3
1
2
Fig. 19
2
4
1