Lennox Compact Pro Installation Operating & Maintenance Manual page 22

Installation of wall control
Using the drilling template, fix the wall control to the wall at 1,5m from the floor. The
control can be installed in normal electrical box in the wall. To open the control box push
the trigger on the left side and lift rotating towards the other side.
Positioning
If you put the control farer than 2m from the conditioner you have to take a loner wire. In
this case use a wire 5x0,34mm
Attention
Be very careful in order not to damage the card and its components during the fixing
procedure. Follow strictly the table when arranging the electrical connection.