Symbols - Lennox Compact Pro Installation Operating & Maintenance Manual

Routine maintenance of the filters and general external cleaning can be done by the user as these operations are not difficult
or dangerous.
During installation and maintenance, respect the precautions indicated in the manual, and on the labels applied inside the units, as well as
all the precautions suggested by good sense and by the safety regulations in effect in your country.
Always wear gloves and protective goggles when performing any operations on the refrigerating
side of the units.
Air conditioners must not be installed in places containing inflammable gasses, explosive gasses,
or in very humid environments (laundries, greenhouses etc) or in places where there are machines
that generate very great heat.
In case of replacement of parts, use only original manufacturer parts.
IMPORTANT!
To prevent any risk of electrocution, always disconnect the main circuit breaker before making
electric connections or performing any maintenance on the units.
The following instructions must be made known to all personnel involved in the machine's
transport and installation.
CHAP 1.2

SYMBOLS

The pictograms in the next chapter provide the necessary information for correct, safe use of the machine in a rapid,
unmistakable way.
Service
- Refers to situations in which you should inform the SERVICE department in the company:
CUSTOMER TECHNICAL SERVICE.
Index
- Paragraphs marked with this symbol contain very important information and recommendations, particularly as regards safety.
Failure to comply with them may result in:
- danger of injury to the operators
- loss of the warranty
- refusal of liability by the manufacturer.
Raised hand
- Refers to actions that absolutely must not be performed.
Danger of high voltage
- Signals to the personnel that the operation described could cause electrocution if not performed according to the safety rules.
Generic danger
- Signals to the personnel that the operation described could cause physical injury if not performed according to the safety
rules.
Danger due to heat
- Signals to the personnel that the operation described could cause burns if not performed according to the safety rules.