Power Over Ethernet Powered Device - Planet FSD-808HP User Manual

3.4 Power over Ethernet Powered Device

3~5 Watts
6~12 Watts
10~12 Watts
3~12 Watts
30 Watts
Since the FSD-808HP per PoE port supports 52V DC PoE power
output, please check and assure the Powered Device (PD) accept-
able DC power range is from 52V DC. Otherwise, it will damage the
Note
Powered Device (PD).
16
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other
Ethernet/non-Ethernet end-devices to the central
where UPS is installed for un-interrupt power system
and power control system.
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory,
Warehouse can install the Access Point any where
with no hesitation.
IP Surveillance
Enterprise, Museum, Campus, Hospital, Bank, can
install IP Camera without limits of install location – no
need electrician to install AC sockets.
PoE Splitter
PoE Splitter split the PoE 48V DC over the Ethernet
cable into 5/12V DC power output. It frees the device
deployment from restrictions due to power outlet
locations, which eliminate the costs for additional AC
wiring and reduces the installation time.
High Power Speed Dome
This state-of-the-art design is considerable to fit in
various network environments like traffic centers,
shopping malls, railway stations, warehouses, airports,
and production facilities for the most demanding
outdoor surveillance applications- no need electrician
to install AC sockets.