Ip Office Department / Workgroup Poe Switch - Planet FSD-808HP User Manual

Cable distance for Switch
The cable distance between the FSD-808HP and PC should not
exceed 100 meter for UTP/STP cable.
Make sure the wiring is correct
It can be used Category 3/4/5 cable in 10 Mbps operation. To
reliably operate your network at 100Mbps, you must use an
Note
Unshielded Twisted-Pair (UTP) Category 5/5e cable, or better Data
Grade cabling. While a Category 3 or 4 cables may initially seem
to work, it will soon cause data loss.
3.3.2 IP Office Department / Workgroup PoE Switch
As the business expands, the additional telephones required could be installed
in less cost via the implementation of PoE IP Telephony system than that of the
traditional circuit wiring telephony system. PLANET FSD-808HP PoE Switch helps
enterprises to efficiently create an integrated data, voice, and powered VoIP
network. PLANET IEEE 802.3af compliant IP Phones can be installed without any
power cable because it can be powered via the standard Ethernet cable from the
connected FSD-808HP. With the FSD-808HP, IP Telephony deployment becomes
more reliable and cost effective, which helps enterprises save tremendous
cost when upgrading from the traditional telephony system to IP Telephony
communications infrastructure.
100Base-TX UTP
100Base-TX UTP w PoE
PoE
Power Line (DC)
DC
Telephone wire
Figure 3-5: IP Office Department / Workgroup PoE Switch Connection
PoE IP
PC Group
Camera
PoE
N
Laptop PoE Wireless AP
PoE VoIP
PoE
Phone
PoE
Phone
PoE VoIP ATA
DC
802.3at splitter
PTZ Camera
FSD-808HP
N
PoE
Core
Switch
FSD-808HP
PoE
15