Care & Maintenance - York Fitness Excel 310 Owner's Manual

Operational instructions
Adjust the seat
1. Unscrew the hand wheel.
2. Adjust the seat up / down or forward /
backward to your requirements.
3. Re-screw the hand wheel - make sure it is
screwed tightly.
4. The basic rule for getting the seat height
right is that as the pedal reaches its lowest
point, the leg is almost straight.
Note: Do not pull the seat out too far - the
maximum is indicated with a piece of tape on
the seat post.
Care & Maintenance
• This equipment should not be placed outdoors, in a garage or an outbuilding. Keep the
equipment in a dry place with as little temperature variation as possible.
• We recommend placing a mat beneath the equipment to protect both the equipment
and your flooring.
• Always place the equipment in a dry environment.
• Use a warm, damp cloth to keep the product clean.
• No wet cleaning of electrical components. Unplug before any care and maintenance.
• The safety level of the equipment can be maintained only if it is regularly examined for
damage and wear. This includes any ropes, pulleys, nuts, bolts, moving parts, bushes,
chains, wheels, bearings & connection points etc.
• Ensure that you inspect the product regularly - at least once a week is recommended.
• Ensure that all fixings are tight before use.
• Always replace damaged / worn components with original parts from the manufacturer.
14 www.yorkfitness.com