Dishwasher Components; Timer - GE Spacemaker GSM1800J Series Technical Service Manual

Throughout this manual, features and appearance
may vary from your model.

Timer

WARNING: Always turn off the electric power
supply before servicing any electrical component,
making ohmmeter checks, or replacing any parts.
Note: All voltage checks should be made with a
voltmeter having a full scale range of 130 volts or
higher. After service is completed, be sure all
safety grounding circuits are complete, all
electrical connections are secure, and all access
panels are in place.
The timer allows the user to select the various
cleaning cycles of the dishwasher. The timer
controls all stages of each cycle. All electrical
functions can be traced on the charts and
diagrams provided in this service manual.
Removal and Installation
1. Disconnect the electrical supply from the
dishwasher.
2. Remove the control timer knob from the
control panel cover.
Control Timer Knob
3. Remove the top screw and mark the hole
threads with a felt-tip marker.

Dishwasher Components

– 10 –
Mark the inside of
the hole threads with
a felt-tip marker.
4. Remove the bottom screw and mark the hole
threads with a felt-tip marker.
5. Open the dishwasher door.
6. Remove the 6 screws that connect the control
panel cover to the dishwasher door.
7. Close the dishwasher door.