GE Spacemaker GSM1800J Series Technical Service Manual page 32

2. If the water does not touch the heating ele-
ment, disconnect power, close the door, and
check the incoming water pressure. A mini-
mum incoming water pressure of 20 PSI is
needed to properly fill the dishwasher basin.
Water Fill Valve Will Not Shut Off
1. Turn on the dishwasher and allow the bottom
of the basin to start filling with water. Discon-
nect power while the basin is filling. If water
continues to flow, turn off the water supply and
replace the water fill valve.
2. If the water turns off when power is discon-
nected, troubleshoot the timer and motor.
Replace the defective part.
Water Fill Valve Strip Circuit
PRESSURE
SWITCH
– 32 –